For vehicles equipped with an Extension Module, refer to optional equipment's manuals.
Display the "Display Settings" screen.
Turn the headlight dimmer switch assembly to the tail or head position.
Check if "Day Mode" on the display adjustment screen is on.
"Day Mode" setting is off
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Enter the "Vehicle Signal Check Mode" screen. (Refer to Check Vehicle Signal in Operation Check)
Check that the display for "TAIL" changes between ON and OFF according to the headlight dimmer switch assembly operation.
| Headlight Dimmer Switch Assembly Condition | Display |
|---|---|
| Tail or head | ON |
| Off | OFF |
Check that the display for "ADIM/TCAN" changes between DIM and BRIGHT according to the headlight dimmer switch assembly operation.
| Headlight Dimmer Switch Assembly Condition | Display |
|---|---|
| Tail or head | DIM |
| Off | BRIGHT |
The display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.
| Proceed to |
|---|
| OK |
| NG |
OK
NG