1.INSTALL FRONT SEAT CUSHION COVER LH
Install the front seat cushion cover LH.
Use the same procedure described for the RH side.
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
Install the front seat belt anchor plate.
| *1 | Protruding Part |
Install the front seat inner belt assembly LH with the nut.
Do not overlap the anchor part of the front seat inner belt assembly LH and protruding part of the front seat cushion frame sub-assembly LH.
3.INSTALL FRONT CENTER SEAT LAP TYPE BELT ASSEMBLY
| *a | Front |
Install the front center seat lap type belt assembly with the bolt.
4.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
| *a | Front |
Align the direction of the anchor plate with the protruding part of the vehicle body as shown in the illustration.
Install the front seat inner belt assembly LH with the bolt.
Do not allow the anchor part of the seat belt to overlap the protruding part of the vehicle body.
5.INSTALL FRONT SEAT ASSEMBLY LH
6.INSTALL FRONT SEAT ASSEMBLY RH