Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM

TOYOTA PARKING ASSIST-SENSOR SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
Use the following procedures to troubleshoot the TOYOTA parking assist-sensor system.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      If the voltage is below 11 V, replace or recharge the battery before proceeding.

    NEXT


    3.PROBLEM SYMPTOMS TABLE
    1. Refer to the Problem Symptoms Table (Click here).
      Result 
      Result
      Proceed to
      Fault is not listed in problem symptoms table
      A
      Fault is listed in problem symptoms table
      B



    B.
    Go to step 5
    A


    4.OVERALL ANALYSIS AND TROUBLESHOOTING
    1. Operation Check (Click here).

    2. Terminals of ECU (Click here).


    NEXT


    5.ADJUSTMENT, REPAIR OR REPLACE

      NEXT


      6.CONFIRMATION TEST

        NEXT

        END