Home › Vehicle Exterior › DOOR / HATCH › FRONT DOOR OPENING TRIM WEATHERSTRIP
RM33K0E _59 Vehicle Exterior _043559 DOOR / HATCH _0219594 FRONT DOOR OPENING TRIM WEATHERSTRIP A

DOOR / HATCH  FRONT DOOR OPENING TRIM WEATHERSTRIP  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

Use the same procedure for RHD and LHD vehicles.

·

The procedures listed below are for LHD vehicles.



PROCEDURE

Hide 62312B 1.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

a.
B438862C01
1.542,3.906 1.406,3.604 1.406,3.604 1.167,3.604 false 1.729,0.427 1.729,0.188 1.729,0.188 1.938,0.188 true 1.906,0.115 2.104,0.313 0.198,0.198 10 true *b 0.958,3.51 1.271,3.708 0.313,0.198 10 false *a
*a Paint Mark
*b Mark Position


Align the paint mark on the front door opening trim weatherstrip LH with the mark position on the vehicle and install the front door opening trim weatherstrip LH.

NOTICE:
·

Always align the paint mark when installing the part. If the paint mark position is out of place, coolant leaks may occur.

·

After the installation, check that the corners are properly installed.



HINT:

To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.



Hide 62112 2.INSTALL COWL SIDE TRIM BOARD LH

Hide 67914B 3.INSTALL FRONT DOOR SCUFF PLATE LH