Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL PRESSURE REGULATOR
RM33K0E _51 Engine / Hybrid System _043572 1GR-FE FUEL _0220961 FUEL PRESSURE REGULATOR A

1GR-FE FUEL  FUEL PRESSURE REGULATOR  INSTALLATION  


PROCEDURE

Hide 23280 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.

Install the vacuum hose to the fuel pressure regulator assembly.


b.

Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure regulator assembly.


c.

Install the fuel pressure regulator assembly to the fuel delivery pipe sub-assembly with the 2 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


Hide 23802B 2.CONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY

Hide 17129 3.INSTALL INTAKE AIR SURGE TANK

Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION