Home › Engine / Hybrid System › 1GR-FE COOLING › WATER PUMP
RM33K0E _51 Engine / Hybrid System _043581 1GR-FE COOLING _0220975 WATER PUMP A

1GR-FE COOLING  WATER PUMP  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
A343701

Do not remove the radiator cap sub-assembly, cylinder block drain cock plugs or radiator drain cock plug while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


PROCEDURE

Hide 16711 2.REMOVE FAN SHROUD

Hide 27020 3.REMOVE GENERATOR ASSEMBLY

Hide 88320 4.DISCONNECT COOLER COMPRESSOR ASSEMBLY

Hide 5.REMOVE WATER INLET ASSEMBLY

a.
A340113

Slide the 2 hose clamps and disconnect the radiator hose inlet and radiator hose outlet from the water inlet assembly.


b.
A340114

Slide the 5 hose clamps and disconnect the water by-pass hose, No. 2 water by-pass hose, No. 3 water by-pass hose, No. 4 water by-pass hose and No. 5 water by-pass hose from the water inlet assembly.


c.
A340115

Remove the 5 bolts and water inlet assembly from the timing chain cover sub-assembly.


d.
A340119

Remove the O-ring from the water outlet pipe.


e.

Remove the gasket from the engine water pump assembly.


Hide 16620 6.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

Hide 16604 7.REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

a.
A340116

w/ Idler Pulley Cover Plate:

i.

Remove the 2 bolts, 2 idler pulley cover plates, 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates.



b.

w/o Idler Pulley Cover Plate:

i.

Remove the 2 bolts, 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates.



c.

for Integrated Type:

i.

Remove the 2 bolts and 2 No. 2 idler pulleys.



Hide 16100 8.REMOVE ENGINE WATER PUMP ASSEMBLY

a.
A340117

Remove the 17 bolts, engine water pump assembly and gasket from the timing chain cover sub-assembly.