67939B
1.REMOVE CENTER BACK DOOR GARNISH
67938A
2.REMOVE BACK DOOR SIDE GARNISH LH
67937B
3.REMOVE BACK DOOR SIDE GARNISH RH
Use the same procedure described for the LH side.
74811D
4.REMOVE DOOR PULL HANDLE
67750
5.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
67847A
6.REMOVE BACK DOOR SERVICE HOLE COVER (w/ Cover)
84280D
7.REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)
84270G
8.REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)
Use the same procedure described for the LH side.
67290
9.REMOVE BACK DOOR DAMPER ASSEMBLY
81590A
10.REMOVE REAR LIGHT ASSEMBLY LH
81580A
11.REMOVE REAR LIGHT ASSEMBLY RH
Use the same procedure described for the LH side.
76801
12.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Remove the 5 nuts.
|
Protective Tape |
Put protective tape around the back door outside garnish sub-assembly.
Detach the clip and remove the back door outside garnish sub-assembly.