Home › Vehicle Interior › SEAT BELT › REAR NO. 2 SEAT OUTER BELT ASSEMBLY
RM33K0E _58 Vehicle Interior _043554 SEAT BELT _0229928 REAR NO. 2 SEAT OUTER BELT ASSEMBLY A

SEAT BELT  REAR NO. 2 SEAT OUTER BELT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 73560 1.INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

a.
B437150C01
2.135,0.51 2.448,0.667 0.313,0.156 10 true *a 1.104,1.781 1.417,1.938 0.313,0.156 10 true *b 2.396,0.5 2.552,0.698 0.156,0.198 10 true 1 0.917,1.771 1.073,1.969 0.156,0.198 10 true 2
*a Bolt A
*b Bolt B


Attach the 2 guides and temporarily install the retractor of the rear No. 2 seat outer belt assembly LH with the 2 bolts.


b.

Tighten the 2 bolts in the order shown in the illustration.

Torque:
Bolt A : 12.5 N*m (127 kgf*cm, 9 ft.*lbf)
Bolt B : 42 N*m (428 kgf*cm, 31 ft.*lbf)


c.
B409913

Connect the rear No. 2 seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73178B 2.INSTALL SEAT BELT ANCHOR COVER CAP

Hide 62512 3.INSTALL QUARTER INSIDE TRIM BOARD LH

Hide 73560 4.INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH (for Floor Anchor)

a.
B409885

Connect the floor anchor of the rear No. 2 seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73370C 5.INSTALL REAR NO.1 SEAT BELT ASSEMBLY OUTER LH (for Floor Anchor)

a.
B409879

Connect the floor anchor of the rear No. 1 seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73233B 6.INSTALL REAR NO. 2 SEAT OUTER LAP BELT ANCHOR COVER

Hide 73233A 7.INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

Hide 67935 8.INSTALL BACK DOOR SCUFF PLATE

Hide 67918E 9.INSTALL REAR DOOR SCUFF PLATE LH

Hide 10.INSTALL REAR NO. 2 SEAT ASSEMBLY LH