Home › Engine / Hybrid System › 2TR-FBE COOLING › WATER PUMP › from 2016.07
RM33K0E _51 Engine / Hybrid System _054517 2TR-FBE COOLING _0272860 WATER PUMP A

2TR-FBE COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL ENGINE WATER PUMP ASSEMBLY

A340081C01
1.156,0.792 1.313,0.99 0.156,0.198 10 false -
V100135

Bolt A
V100136

Bolt B


a.

Install a new gasket and the engine water pump assembly with the 10 bolts.

Torque:
for bolt A : 25 N*m (255 kgf*cm, 18 ft.*lbf)
for bolt B : 13 N*m (133 kgf*cm, 10 ft.*lbf)

NOTICE:

Make sure that there is no oil on the threads of bolts A.



Hide 16620D 2.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

A340082C01
1.708,0.427 1.865,0.625 0.156,0.198 10 false - 0.563,0.958 0.708,1.156 0.146,0.198 10 true 1 1.927,0.344 2.083,0.542 0.156,0.198 10 true 3 1.979,1.646 2.135,1.844 0.156,0.198 10 true 2
V100135

Bolt A
V100136

Bolt B
V100137

Bolt C


a.

Temporarily install the V-ribbed belt tensioner assembly with the 3 bolts.

HINT:

Make sure the flanges of the bolts are contacting the tensioner surface.



b.

Install the V-ribbed belt tensioner assembly by tightening the 3 bolts in the order shown in the illustration.

Torque:
for bolt A : 43 N*m (438 kgf*cm, 32 ft.*lbf)
for bolt B : 40 N*m (408 kgf*cm, 30 ft.*lbf)
for bolt C : 23 N*m (235 kgf*cm, 17 ft.*lbf)


Hide 16603 3.INSTALL NO. 1 IDLER PULLEY SUB-ASSEMBLY

A340083C01
2.313,0.823 2.542,0.823 2.542,0.823 2.979,1.156 false 2.625,2.385 2.625,1.927 false 2.125,0.76 2.365,0.917 0.24,0.156 10 false *1 2.542,2.417 2.854,2.573 0.313,0.156 10 false *2
*1 Spacer
*2 No. 1 Idler Pulley Sub-assembly


a.

Install the spacer and No. 1 idler pulley sub-assembly with the bolt.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


Hide 15301 4.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

a.

Install a new O-ring and the engine oil level dipstick guide with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.

Install the engine oil level dipstick.


Hide 27020 5.INSTALL GENERATOR ASSEMBLY

Hide 16470 7.INSTALL RADIATOR RESERVOIR

Hide 17621A 8.CONNECT AIR PUMP INLET

a.

Connect the air pump inlet to the fan shroud with the bolt.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 16572 9.INSTALL RADIATOR HOSE OUTLET

Hide 16571 10.INSTALL RADIATOR HOSE INLET

Hide 51410 13.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY