Home › Engine / Hybrid System › 1GR-FE ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL
RM3250E _51 Engine / Hybrid System _037982 1GR-FE ENGINE MECHANICAL _0177652 FRONT CRANKSHAFT OIL SEAL A

1GR-FE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 16400 1.REMOVE RADIATOR ASSEMBLY

Hide 13471 2.REMOVE CRANKSHAFT PULLEY

Hide 11303A 3.REMOVE FRONT CRANKSHAFT OIL SEAL

a.
A326587C01
0.99,1.531 1.219,1.531 1.219,1.531 1.781,1.042 true 0.802,1.427 1.115,1.583 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver, pry out the front crankshaft oil seal.

NOTICE:
·

Be careful not to damage the crankshaft.

·

After removing the front crankshaft oil seal, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.



HINT:

Tape the screwdriver tip before use.