Home › Engine / Hybrid System › 1GR-FE ENGINE MECHANICAL › ENGINE UNIT
RM3250E _51 Engine / Hybrid System _037982 1GR-FE ENGINE MECHANICAL _0177655 ENGINE UNIT A

1GR-FE ENGINE MECHANICAL  ENGINE UNIT  REMOVAL  


PROCEDURE

Hide 82121 1.REMOVE ENGINE WIRE

a.

Disconnect the connectors and wire harness from the engine.


b.
A349985

Remove the 2 bolts and wire harness from the engine.


Hide 2.REMOVE WIRE HARNESS CLAMP BRACKET

a.
A349982

for Rear Side:

i.

Remove the 2 bolts and 2 wire harness clamp brackets.



b.
A349981

for RH Side:

i.

Remove the 3 bolts and 3 wire harness clamp brackets.



c.
A349983

for LH Side:

i.

Remove the bolt and wire harness clamp bracket.



Hide 3.REMOVE WATER HOSE SUB-ASSEMBLY

a.

Slide the 2 clamps and remove the water hose sub-assembly.


Hide 12261 4.REMOVE PCV HOSE

Hide 12262 5.REMOVE NO. 2 PCV HOSE

Hide 6.REMOVE NO. 1 FUEL PIPE SUB-ASSEMBLY AND NO. 2 FUEL PIPE SUB-ASSEMBLY

a.
A347904

Remove the No. 2 fuel pipe clamp and disconnect the No. 1 fuel pipe sub-assembly from the fuel delivery pipe sub-assembly.


b.

Remove the No. 2 fuel pipe clamp and disconnect the No. 2 fuel pipe sub-assembly from the fuel pressure regulator assembly.


c.

Remove the 2 bolts, No. 1 fuel pipe sub-assembly and No. 2 fuel pipe sub-assembly.


Hide 12311 7.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH

a.

Remove the 4 bolts and front No. 1 engine mounting bracket RH.


Hide 12315 8.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH

a.

Remove the 3 bolts and front No. 1 engine mounting bracket LH.


Hide 16620 9.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

a.
A344591

Remove the 5 bolts and V-ribbed belt tensioner assembly.


Hide 23807 10.REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY

Hide 23250 11.REMOVE FUEL INJECTOR ASSEMBLY

Hide 11452 14.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

a.

Remove the engine oil level dipstick.


b.

Remove the bolt and pull out the engine oil level dipstick guide.


c.

Remove the O-ring from the engine oil level dipstick guide.


Hide 16604 15.REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

Hide 16603 16.REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY

a.
A326600

Remove the bolt and No. 1 idler pulley sub-assembly.