Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER(for Steel Type Bumper) › 2015.06–2016.03
RM3250E _59 Vehicle Exterior _038080 EXTERIOR PANELS / TRIM _0184372 FRONT BUMPER(for Steel Type Bumper) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(for Steel Type Bumper)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS


PROCEDURE

Hide 53294C 1.INSTALL RADIATOR SIDE DEFLECTOR LH

a.
B412721C01
0,0 0,0 false
V113147

Install in this Direction


w/ Intercooler:

i.

Attach the claw to install the radiator side deflector LH as shown in the illustration.



b.
B412722C01
0,0 0,0 false
V113147

Install in this Direction


w/o Intercooler:

i.

Attach the claw to install the radiator side deflector LH as shown in the illustration.



Hide 53293C 2.INSTALL RADIATOR SIDE DEFLECTOR RH

HINT:

Use the same procedure described for the LH side.


Hide 52116A 3.INSTALL FRONT BUMPER SIDE SUPPORT LH (for Standard Body)

a.
B412727C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the front bumper side support LH as shown in the illustration.


b.

Install the 2 clips and bolt.


Hide 52115A 4.INSTALL FRONT BUMPER SIDE SUPPORT RH (for Standard Body)

HINT:

Use the same procedure described for the LH side.


Hide 52116A 5.INSTALL FRONT BUMPER SIDE SUPPORT LH (for Wide Body)

a.
B412720C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the front bumper side support LH as shown in the illustration.


b.

Install the 3 clips and bolt.


Hide 52115A 6.INSTALL FRONT BUMPER SIDE SUPPORT RH (for Wide Body)

HINT:

Use the same procedure described for the LH side.


Hide 52124B 7.INSTALL FRONT BUMPER REINFORCEMENT PLATE LH

a.
B412719C01
1.792,1.677 1.927,1.771 false
V113147

Install in this Direction


Attach the guide to install the front bumper reinforcement sub-assembly as shown in the illustration.


b.

Install the bolt.

Torque:
23 N*m (235 kgf*cm, 17 ft.*lbf)


Hide 52123B 8.INSTALL FRONT BUMPER REINFORCEMENT PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 52021 9.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

a.
B412718C01
1.229,1.469 1.469,1.438 false
V113147

Install in this Direction


Attach the guide to install the front bumper reinforcement sub-assembly as shown in the illustration.


b.

Install the 4 bolts.

Torque:
27 N*m (275 kgf*cm, 20 ft.*lbf)


Hide 52140 10.INSTALL FRONT BUMPER SIDE MOUNTING BRACKET ASSEMBLY LH

a.
B412702

Install the front bumper side mounting bracket assembly LH with the 2 bolts.

Torque:
73.5 N*m (749 kgf*cm, 54 ft.*lbf)


Hide 52130 11.INSTALL FRONT BUMPER SIDE MOUNTING BRACKET ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52103 12.INSTALL FRONT BUMPER BRACKET SUB-ASSEMBLY LH

a.
B412701C02
1,1.74 1.25,1.74 1.25,1.74 1.25,1.406 true 0.75,1.667 1,1.865 0.25,0.198 10 true *a
*a matchmark


Align the matchmark on the front bumper bracket sub-assembly LH and vehicle body.


b.

Install the front bumper bracket sub-assembly LH with the 4 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 52102 13.INSTALL FRONT BUMPER BRACKET SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 14.INSTALL FRONT BUMPER ASSEMBLY

a.
B414792C01
0.063,0.042 0.375,0.24 0.313,0.198 10 false *A 0.073,2.531 0.385,2.729 0.313,0.198 10 false *B
*A for Standard Body
*B for Wide Body
V113147

Install in this Direction


Attach the guide to install the front bumper assembly as shown in the illustration.


b.

w/ Fog Light:

i.

Connect the connector.



c.
B414790C01
0.052,0.042 0.365,0.24 0.313,0.198 10 false *A 0.063,2.5 0.375,2.698 0.313,0.198 10 false *B
*A for Standard Body
*B for Wide Body


Install the 8 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


d.
B412776C01
0.094,0.063 0.406,0.26 0.313,0.198 10 false *A 0.125,2.552 0.438,2.75 0.313,0.198 10 false *B
*A for Standard Body
*B for Wide Body


Install the 4 bolts.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


Hide 53892G 15.INSTALL FRONT FENDER SPLASH SHIELD FRONT SEAL LH

Hide 53891J 16.INSTALL FRONT FENDER SPLASH SHIELD FRONT SEAL RH

HINT:

Use the same procedure described for the LH side.


Hide 52119A 17.INSTALL FRONT BUMPER COVER

a.
B414789C02
0.073,0.073 0.385,0.271 0.313,0.198 10 false *A 0.125,2.583 0.438,2.781 0.313,0.198 10 false *B
*A for Standard Body
*B for Wide Body
V100155

Protective Tape


Put protective tape around the front bumper cover.


b.
B412726C01
0.083,2.479 0.417,2.719 0.333,0.24 10 false *B 0.052,0.052 0.365,0.25 0.313,0.198 10 false *A
*A for Standard Body
*B for Wide Body
V113147

Install in this Direction


Install the front bumper cover as shown in the illustration.


c.
B412712C01
2.229,3.781 2.5,3.896 false
V113147

Install in this Direction


for Standard Body:

i.

Attach the claw as shown in the illustration.

HINT:

Use the same procedure for the claw on the other side.




d.
B412713C01
2.396,3.833 2.552,3.917 false
V113147

Install in this Direction


for Wide Body:

i.

Attach the claw as shown in the illustration.

HINT:

Use the same procedure for the claw on the other side.




e.
B412690

Install the 3 screws.


f.
B412689C01
0.646,0.479 0.896,0.479 true 1.406,0.323 1.656,0.323 true 2.146,0.323 2.396,0.323 true 2.906,0.479 3.073,0.479 true 1.667,0.219 1.917,0.417 0.25,0.198 10 true *a 2.406,0.219 2.656,0.417 0.25,0.198 10 true *a 3.073,0.375 3.333,0.594 0.26,0.219 10 true *b 0.906,0.375 1.167,0.594 0.26,0.219 10 true *b
*a Bolt
*b Screw


Install the 2 screws and 2 bolts.

Torque:
for bolt : 12 N*m (122 kgf*cm, 9 ft.*lbf)


g.

Remove the protective tape.


h.
B412687C02
0.063,0.052 0.375,0.25 0.313,0.198 10 false *A 0.083,2.458 0.396,2.656 0.313,0.198 10 false *B
*A for Standard Body
*B for Wide Body


Install the clip.

HINT:

Use the same procedure for the clip on the other side.



Hide 53117C 18.INSTALL NO. 1 RADIATOR GRILLE RETAINER