Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE REAR SEAT ASSEMBLY
for Seat Cushion 60/40 Split Type:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY(for Seat Cushion 60/40 Split Type)>REMOVAL
for Seat Cushion Bench Type:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY(for Seat Cushion Bench Type)>REMOVAL
67914B
2.REMOVE FRONT DOOR SCUFF PLATE LH
73178B
3.REMOVE SEAT BELT ANCHOR COVER CAP
62514A
4.REMOVE LOWER QUARTER TRIM PANEL LH
73370C
5.REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH
Remove the bolt and disconnect the floor anchor of the rear No. 1 seat outer belt assembly LH.
Remove the bolt and disconnect the shoulder anchor of the rear No. 1 seat outer belt assembly LH.
Remove the 2 bolts.
Detach the 2 guides and remove the rear No. 1 seat outer belt assembly LH.