Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL(for Manual Air Conditioning System)
RM3250E _58 Vehicle Interior _038073 HEATING / AIR CONDITIONING _0186140 AIR CONDITIONING PANEL(for Manual Air Conditioning System) A

HEATING / AIR CONDITIONING  AIR CONDITIONING PANEL(for Manual Air Conditioning System)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 45100 1.REMOVE STEERING WHEEL ASSEMBLY

Hide 55410C 2.REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 55905J 3.REMOVE CONTROL KNOB SUB-ASSEMBLY

a.
E320461

Remove the 2 control knob sub-assemblies.


Hide 55918A 4.REMOVE AIR INLET DAMPER CONTROL LEVER

a.
E320462

Remove the air inlet damper control lever.


Hide 84013A 5.REMOVE INTEGRATION PANEL SUB-ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY

a.
E320463C01
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the integration panel sub-assembly.


b.

Detach the clip and remove the integration panel sub-assembly with air conditioning control assembly.


c.
E323708

Disconnect the 2 connectors.


Hide 55906A 6.DISCONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY

a.
E320464

Detach the claw and disconnect the defroster damper control cable sub-assembly.


Hide 55909A 7.DISCONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY

a.
E320465

Detach the claw and disconnect the air mix damper control cable sub-assembly.


Hide 55908A 8.DISCONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY

a.
E320466C01
0,0 0,0 false
V113147

Remove in this Direction


Detach the claw and disconnect the air inlet damper control cable sub-assembly.


b.
E320467C01
0,0 0,0 false
V113147

Remove in this Direction


Detach the claw and disconnect the air inlet damper control cable sub-assembly.