Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
1.REMOVE FRONT BUMPER COVER
for Steel Type Bumper:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Steel Type Bumper)>REMOVAL
for Resin Type Bumper:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Resin Type Bumper)>REMOVAL
81220
2.REMOVE FOG LIGHT ASSEMBLY LH
Remove the 3 screws.
| *A | for Steel Type Bumper | *B | for Resin Type Bumper |
Detach the guide and remove the fog light assembly LH.
| *A | for Steel Type Bumper | *B | for Resin Type Bumper |