Home › General › MAINTENANCE › BRAKE › from 2016.01
RM3250E _V1 General _037971 MAINTENANCE _0187610 BRAKE N

MAINTENANCE  BRAKE  GENERAL MAINTENANCE  


PROCEDURE

Hide 1.INSPECT BRAKE PEDAL AND PARKING BRAKE

a.

Inspect the brake pedal and parking brake.

Type See procedure
Brake pedal (Click here)
Parking brake (Click here)


Hide 2.INSPECT BRAKE LINE PIPES AND HOSES

HINT:

Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.


a.
P009958

Using a mirror, check the entire circumference and length of the brake lines and hoses for:

·

Damage

·

Wear

·

Deformation

·

Cracks

·

Corrosion

·

Leaks

·

Bends

·

Twists



b.

Check all the clamps for tightness and the connections for leakage.


c.

Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.


d.

Check that the lines are installed properly and pass through the center of the grommets.


Hide 3.INSPECT BRAKE PADS AND DISCS

a.

Check the front brake pads and discs.

Type See procedure
for 4WD and Pre-Runner (Click here)
for 15 inch Front Disc Brake 2WD (Click here)
for 16 inch Front Disc Brake 2WD (Click here)


Hide 4.INSPECT BRAKE LININGS AND DRUMS

a.

Check the rear brake linings and drums.

Type See procedure
for 2WD (Click here)
for 4WD and Pre-Runner (Click here)


Hide 5.INSPECT BRAKE FLUID

a.

Inspect the brake fluid.

Type See procedure
w/ VSC (Click here)
w/o VSC (Click here)
w/o ABS (Click here)


Hide 6.REPLACE BRAKE FLUID

a.

Replace the brake fluid.

Type See procedure
w/ VSC (Click here)
w/o VSC (Click here)
w/o ABS (Click here)


Hide 7.INSPECT VACUUM PUMP

a.

Inspect the vacuum pump.

Type See procedure
for 1GD-FTV, 2GD-FTV (Click here)
for 1KD-FTV, 2KD-FTV (Click here)
for 5L-E (Click here)