Home › Engine / Hybrid System › 5L-E INTAKE / EXHAUST › INTAKE MANIFOLD › from 2016.01
RM3250E _51 Engine / Hybrid System _049914 5L-E INTAKE / EXHAUST _0243535 INTAKE MANIFOLD A

5L-E INTAKE / EXHAUST  INTAKE MANIFOLD  INSTALLATION  


PROCEDURE

Hide 17111 1.INSTALL INTAKE MANIFOLD

a.
A362740C01
0.531,2.01 0.698,2.01 0.698,2.01 0.781,1.344 true 0.344,1.906 0.542,2.115 0.198,0.208 10 false *a
*a Protrusion
V100135

Upward


Install a new gasket to the cylinder head sub-assembly with the protrusion facing upward.


b.
A375698C01
0,0 0,0 false
V100135

Bolt
V100136

Nut


Install the intake manifold with the 6 bolts and 2 nuts. Uniformly tighten the bolts and nuts in several steps.

Torque:
23.5 N*m (240 kgf*cm, 17 ft.*lbf)


Hide 23701 2.INSTALL INJECTION PIPE SUB-ASSEMBLY

Hide 19871 3.INSTALL NO. 1 GLOW PLUG CONNECTOR

Hide 4.INSTALL WIRE HARNESS CLAMP BRACKET

a.

Install the wire harness clamp bracket with the bolt.

Torque:
13.5 N*m (138 kgf*cm, 10 ft.*lbf)


b.

Attach the wire harness clamp.


c.

Install the wire harness clamp bracket with the 2 bolts.

Torque:
13.5 N*m (138 kgf*cm, 10 ft.*lbf)


d.

Attach the 2 wire harness clamps to the wire harness clamp bracket.


Hide 11452 5.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

a.

Apply a light coat of engine oil to a new O-ring.


b.

Install the O-ring to the engine oil level dipstick guide.


c.
A362738N01
2.094,2.563 2.25,2.76 0.156,0.198 10 true B 2.135,0.188 2.292,0.385 0.156,0.198 10 true A

Install the engine oil level dipstick guide with the 2 bolts.

Torque:
for bolt A : 23.5 N*m (240 kgf*cm, 17 ft.*lbf)
for bolt B : 39 N*m (398 kgf*cm, 29 ft.*lbf)


d.

Install the engine oil level dipstick.