1.DRAIN ENGINE COOLANT
2.DRAIN ENGINE OIL
27020
3.REMOVE GENERATOR ASSEMBLY
17141
4.REMOVE EXHAUST MANIFOLD
15601
5.REMOVE OIL FILTER SUB-ASSEMBLY
29300A
6.DISCONNECT VACUUM PUMP OIL INLET HOSE
Remove the union bolt and 2 gaskets, and then disconnect the vacuum pump oil inlet hose from the cylinder block sub-assembly.
15609
7.REMOVE OIL FILTER BRACKET SUB-ASSEMBLY
Remove the 11 bolts, 2 nuts, oil filter bracket sub-assembly and gasket from the cylinder block sub-assembly.
15710
8.REMOVE OIL COOLER ASSEMBLY
Remove the 4 nuts, oil cooler assembly and 2 gaskets from the oil filter bracket sub-assembly.