Home › Engine / Hybrid System › 2TR-FBE FUEL › FUEL PRESSURE REGULATOR › from 2016.07
RM33J0E _51 Engine / Hybrid System _053775 2TR-FBE FUEL _0264907 FUEL PRESSURE REGULATOR A

2TR-FBE FUEL  FUEL PRESSURE REGULATOR  REMOVAL  


PROCEDURE

Hide 1.DISCHARGE FUEL SYSTEM PRESSURE

Hide 2. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 17861 4.REMOVE INTAKE AIR CONNECTOR

Hide 23273H 5.DISCONNECT NO. 2 FUEL HOSE

Hide 23280 6.REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

a.
A382784

Disconnect the purge VSV connector.


b.

Disconnect the throttle body connector.


c.

Detach the wire harness clamp.


d.
A382785

Disconnect the vacuum hose.


e.

Remove the 3 bolts and fuel pressure regulator assembly.


f.

Remove the O-ring from the fuel pressure regulator assembly.