Home › Engine / Hybrid System › 2TR-FBE FUEL › FUEL FILTER › from 2016.07
RM33J0E _51 Engine / Hybrid System _053775 2TR-FBE FUEL _0264909 FUEL FILTER A

2TR-FBE FUEL  FUEL FILTER  REPLACEMENT  


PROCEDURE

Hide 1.DISCHARGE FUEL SYSTEM PRESSURE

Hide 2. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 23271H 4.DISCONNECT NO. 1 FUEL HOSE

a.
A382794

Disconnect the No. 1 fuel hose.

Click hereEngine / Hybrid System>2TR-FBE FUEL>FUEL SYSTEM>PRECAUTION


Hide 23300P 5.REMOVE FUEL FILTER ASSEMBLY

a.
A382795C01
0,0 0,0 false
V100135

Pull
V100136

Push


Disconnect the fuel filter from the bracket, and then disconnect the fuel main tube and remove the fuel filter assembly.

Click hereEngine / Hybrid System>2TR-FBE FUEL>FUEL SYSTEM>PRECAUTION


Hide 23300P 6.INSTALL FUEL FILTER ASSEMBLY

a.
A382796C01
2.021,0.844 2.521,0.844 true 2.542,0.74 2.771,0.948 0.229,0.208 10 true *a
*a Arrow


Face the arrow on the fuel filter assembly upward and connect the fuel main tube to the lower pipe of the fuel filter assembly, and then connect the fuel filter assembly to the bracket.


Hide 23271H 7.CONNECT NO. 1 FUEL HOSE

a.

Connect the No. 1 fuel hose.

Click hereEngine / Hybrid System>2TR-FBE FUEL>FUEL SYSTEM>PRECAUTION


b.

Attach the No. 1 fuel hose to the fuel filter assembly.


Hide 8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION