27020
1.INSTALL GENERATOR ASSEMBLY
Install the generator assembly with the 3 bolts.
Connect the wire harness to terminal B with the nut.
Install the generator bracket with the bolt.
Install the generator terminal cap.
Connect the generator connector.
16361A
2.INSTALL FAN AND GENERATOR V BELT
17701
3.INSTALL AIR CLEANER CASE SUB-ASSEMBLY
17801
4.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
17705
5.INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE
6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION