46430
1.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY
Install the No. 3 parking brake cable assembly with the 4 bolts and nut.
Install the clip.
Install the No. 3 parking brake cable assembly to the backing plate with the 2 bolts.
Connect the No. 3 parking brake cable assembly to the parking brake shoe lever.
Click hereBrake>PARKING BRAKE>PARKING BRAKE ASSEMBLY(for Rear Disc Brake)>REASSEMBLY
46304
2.INSTALL PARKING BRAKE EQUALIZER SUB-ASSEMBLY
Install the parking brake equalizer sub-assembly with the 2 bolts.
46420
3.INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY
Install the No. 2 parking brake cable assembly with the 4 bolts.
|
MP grease |
Connect the No. 2 parking brake cable assembly to the parking brake equalizer sub-assembly and apply MP grease to the connecting portion.
Connect the No. 2 parking brake cable assembly to the backing plate with the 2 bolts.
Connect the No. 2 parking brake cable assembly to the parking brake shoe lever.
Click hereBrake>PARKING BRAKE>PARKING BRAKE ASSEMBLY(for Rear Disc Brake)>REASSEMBLY
46410
4.INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
Install the cable support bracket with the bolt.
Insert the No. 1 parking brake cable assembly from inside the vehicle.
Install the 2 bolts.
Connect the No. 1 parking brake cable assembly to the cable support bracket.
Connect the No. 1 parking brake cable assembly to the parking brake equalizer sub-assembly.
Connect the No. 1 parking brake cable assembly to the No. 3 parking brake cable assembly.
|
MP grease |
Apply MP grease to the pin.
Install the clip and pin to the No. 3 parking brake cable assembly.
5.INSTALL FUEL TANK
6.INSTALL PROPELLER SHAFT ASSEMBLY
46439A
7.INSTALL NO. 2 PARKING BRAKE CABLE HEAT INSULATOR
Install the No. 2 parking brake cable heat insulator with the 2 bolts.
46439
8.INSTALL PARKING BRAKE CABLE HEAT INSULATOR
Install the parking brake cable heat insulator with the 2 bolts.
42431
9.INSTALL REAR DISC
47850
10.CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH
Connect the rear disc brake cylinder assembly LH with the 2 bolts.
47830
11.CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY RH
Use the same procedure described for the LH side.
58996A
12.INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET
Install the No. 2 console box mounting bracket to the intermediate lever protector with the 2 bolts.
13.INSTALL INTERMEDIATE LEVER PROTECTOR
Install the intermediate lever protector with the 3 bolts.
Install the floor carpet.
62414A
14.INSTALL LOWER CENTER PILLAR GARNISH LH
62413A
15.INSTALL LOWER CENTER PILLAR GARNISH RH
67918E
16.INSTALL REAR DOOR SCUFF PLATE LH
67917C
17.INSTALL REAR DOOR SCUFF PLATE RH
67914B
18.INSTALL FRONT DOOR SCUFF PLATE LH
67913B
19.INSTALL FRONT DOOR SCUFF PLATE RH
20.INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
21.INSTALL FRONT SEAT ASSEMBLY (for Power Seat)
22.INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY
23.ADJUST PARKING BRAKE LEVER TRAVEL
24.INSTALL REAR WHEEL