Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH › 2015.08–2016.01
RM3270E _59 Vehicle Exterior _041722 EXTERIOR PANELS / TRIM _0203221 BACK DOOR OUTSIDE GARNISH A

EXTERIOR PANELS / TRIM  BACK DOOR OUTSIDE GARNISH  INSTALLATION  


PROCEDURE

Hide 76801 1.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

a.
B400247

Attach the 3 clips to install the back door outside garnish sub-assembly.


b.

Remove the protective tape.


c.
B400245

Install the 5 nuts.

Torque:
4.9 N*m (50 kgf*cm, 43 in.*lbf)


Hide 81590A 2.INSTALL REAR LIGHT ASSEMBLY LH

Hide 81580A 3.INSTALL REAR LIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 67290 4.INSTALL BACK DOOR DAMPER ASSEMBLY

Hide 84280D 5.INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

Hide 84270G 6.INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

HINT:

Use the same procedure described for the LH side.


Hide 67750 7.INSTALL BACK DOOR TRIM BOARD ASSEMBLY

Hide 74811D 8.INSTALL DOOR PULL HANDLE

Hide 67938A 9.INSTALL BACK DOOR SIDE GARNISH LH

Hide 67937B 10.INSTALL BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 67939B 11.INSTALL CENTER BACK DOOR GARNISH