Use the same procedure for the RH and LH sides.
The procedure listed below is for the RH side.
62311B
1.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
| *a | Paint Mark |
| *b | Mark Position |
Align the paint mark on the front door opening trim weatherstrip RH with the mark position on the vehicle and install the front door opening trim weatherstrip RH.
Always align the paint mark when installing the part. If the paint mark position is out of place, coolant leaks may occur.
After the installation, check that the corners are properly installed.
To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.
67913B
2.INSTALL FRONT DOOR SCUFF PLATE RH
62111C
3.INSTALL COWL SIDE TRIM BOARD RH