Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BLACK OUT TAPE(for Rear Door) › 2015.08–2016.01
RM3270E _59 Vehicle Exterior _041722 EXTERIOR PANELS / TRIM _0205121 BLACK OUT TAPE(for Rear Door) A

EXTERIOR PANELS / TRIM  BLACK OUT TAPE(for Rear Door)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 75926C 2.INSTALL NO. 3 BLACK OUT TAPE LH

HINT:

When installing the No. 3 black out tape LH, heat the rear door panel and No. 3 black out tape LH using a heat light.


Standard:
Item Temperature
Rear Door Panel 40 to 60°C (104 to 140°F)
No. 3 Black Out Tape LH 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Refer to the illustration to position a new No. 3 black out tape LH.

B409533C01
5.667,1.823 5.667,2.073 5.667,2.073 6.083,2.073 false 5.75,3.01 5.75,3.26 5.75,3.26 6.167,3.26 false 5.74,0.563 5.74,0.813 5.74,0.813 6.156,0.813 false 4.135,0.135 4.906,0.333 0.771,0.198 10 false a - a 4.135,1.25 4.906,1.448 0.771,0.198 10 false b - b 4.135,2.552 4.906,2.75 0.771,0.198 10 false c - c 6.208,0.719 6.521,0.917 0.313,0.198 10 false *a 6.135,1.99 6.448,2.188 0.313,0.198 10 false *a 6.208,3.177 6.521,3.375 0.313,0.198 10 false *a 6.083,0.25 6.24,0.448 0.156,0.198 10 false A 5.99,1.5 6.146,1.698 0.156,0.198 10 false B 6.198,2.75 6.354,2.948 0.156,0.198 10 false C 0.917,1.365 1.073,1.563 0.156,0.198 10 true a 0.938,0.406 1.094,0.604 0.156,0.198 10 false a 2.354,1.573 2.51,1.771 0.156,0.198 10 false b 1.75,2.25 1.906,2.448 0.156,0.198 10 false b 3.302,2.323 3.458,2.521 0.156,0.198 10 false c 3.302,3.271 3.458,3.469 0.156,0.198 10 false c
*a Edge of Curved Surface - -


Standard:
Area Specified Condition Area Specified Condition
A -1.0 to 1.0 mm (-0.0394 to 0.0394 in.) B 3.0 mm (0.118 in.)
C 0 to 2.0 mm (0 to 0.0787 in.) - -



b.

Remove the release paper from the No. 3 black out tape LH.


c.

After installing the No. 3 black out tape LH, remove the unnecessary part above the perforation.


Hide 75924C 3.INSTALL NO. 2 BLACK OUT TAPE LH

HINT:

When installing the No. 2 black out tape LH, heat the rear door panel and No. 2 black out tape LH using a heat light.


Standard:
Item Temperature
Rear Door Panel 40 to 60°C (104 to 140°F)
No. 2 Black Out Tape LH 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



a.

Refer to the illustration to position a new No. 2 black out tape LH.

B409535C01
1.583,2.76 1.75,2.76 1.75,2.76 1.75,3.177 false 2.958,1.917 3.125,1.917 false 1.479,0.198 1.646,0.198 1.646,0.198 1.646,0.615 false 3.135,1.802 3.292,2 0.156,0.198 10 false *a 4.552,0.573 4.708,0.771 0.156,0.198 10 false a 4.385,1.031 4.542,1.229 0.156,0.198 10 false a 4.146,1.615 4.302,1.813 0.156,0.198 10 false b 5.063,1.833 5.219,2.031 0.156,0.198 10 false b 3.948,2.5 4.104,2.698 0.156,0.198 10 false c 3.865,2.938 4.021,3.135 0.156,0.198 10 false c 1.396,2.667 1.552,2.865 0.156,0.198 10 false *a 1.313,0.104 1.469,0.302 0.156,0.198 10 false *a 0.375,0.125 0.833,0.323 0.458,0.198 10 false a - a 0.396,1.427 0.854,1.625 0.458,0.198 10 false b - b 0.375,2.708 0.833,2.906 0.458,0.198 10 false c - c 1.188,0.323 1.344,0.521 0.156,0.198 10 false A 0.646,2.323 0.802,2.521 0.156,0.198 10 false B 1.292,3.021 1.448,3.219 0.156,0.198 10 false D 2.833,1.51 2.99,1.708 0.156,0.198 10 false C
*a Edge of Curved Surface - -


Standard:
Area Specified Condition Area Specified Condition
A -1.0 to 1.0 mm (-0.0394 to 0.0394 in.) B 3.0 to 5.0 mm (0.118 to 0.197 in.)
C 3.0 mm (0.118 in.) D 0 to 2.0 mm (0 to 0.0787 in.)



b.

Remove the release paper from the No. 2 black out tape LH.


c.

After installing the No. 2 black out tape LH, remove the unnecessary part above the perforation.


Hide 67872 4.INSTALL REAR DOOR WEATHERSTRIP LH

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 75740 5.INSTALL REAR DOOR BELT MOULDING ASSEMBLY LH

Hide 75724 6.INSTALL REAR DOOR REAR BELT MOULDING LH

Hide 68124C 7.INSTALL REAR DOOR QUARTER WINDOW GLASS LH

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 68104 8.INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 67408E 9.INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 68152C 10.INSTALL REAR DOOR GLASS RUN LH

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 67842E 11.INSTALL REAR DOOR SERVICE HOLE COVER LH

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 67604 12.INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 69284D 13.INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 81230 14.INSTALL COURTESY LIGHT ASSEMBLY (w/ Courtesy Light)

Hide 15.INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 74260 16.INSTALL REAR ARMREST ASSEMBLY LH

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 67674A 17.INSTALL REAR DOOR FRAME GARNISH LH

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR>REASSEMBLY


Hide 18.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION