Home › Vehicle Interior › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041712 SEAT BELT _0206029 FRONT SEAT OUTER BELT ASSEMBLY A

SEAT BELT  FRONT SEAT OUTER BELT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the RH side.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 73200A 1.INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY

a.
B404843N01
1.99,1.948 2.146,2.146 0.156,0.198 10 true 1 2.198,0.26 2.354,0.458 0.156,0.198 10 true 2

Attach the guide and temporarily install the front shoulder belt anchor adjuster assembly with the 2 bolts.


b.

Tighten the 2 bolts in the order shown in the illustration.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73135A 2.INSTALL SHOULDER BELT ANCHOR COVER RH

a.
B409156C01
1.729,1.344 2.365,1.521 2.365,1.521 1.75,1.938 true 2.438,1.448 2.75,1.604 0.313,0.156 10 false *1
*1 Shoulder Belt Anchor Cover RH


Attach the claw and install the 2 shoulder belt anchor cover RH.


Hide 73023 3.INSTALL FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH

HINT:

Perform this procedure when replacing the shoulder belt anchor cover RH.


a.
B404842C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw and install the front shoulder belt anchor plate sub-assembly RH as shown in the illustration.


Hide 62411B 4.INSTALL UPPER CENTER PILLAR GARNISH RH

Hide 73210 5.INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH

a.
B404838

Attach the 2 guides and install the front seat outer belt assembly RH with the bolt.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


b.
B404839C01
1,0.417 1.281,0.271 true 1.344,0.177 1.656,0.375 0.313,0.198 10 false *1
*1 Locking Button


Connect the pretensioner connector and lock the locking button as shown in the illustration.


c.
B404836

Connect the shoulder anchor of the front seat outer belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


d.

Check that the ELR locks.

NOTICE:

The check should be performed with the front seat outer belt assembly RH installed.


i.

With the belt assembly installed, check that the belt locks when it is pulled out quickly.



Hide 73178A 6.INSTALL SEAT BELT ANCHOR COVER CAP

Hide 62413A 7.INSTALL LOWER CENTER PILLAR GARNISH RH

Hide 73210 8.INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH (Floor Anchor)

a.
B404832

Connect the floor anchor of the front seat outer belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73233 9.INSTALL OUTER LAP BELT ANCHOR COVER

Hide 67917C 10.INSTALL REAR DOOR SCUFF PLATE RH

Hide 67913B 11.INSTALL FRONT DOOR SCUFF PLATE RH

Hide 12.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION