Home › Vehicle Interior › METER / GAUGE / DISPLAY › CLOCK › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041708 METER / GAUGE / DISPLAY _0213626 CLOCK A

METER / GAUGE / DISPLAY  CLOCK  INSTALLATION  


PROCEDURE

Hide 83910G 1.INSTALL CLOCK ASSEMBLY

a.
E320342

Attach the claw to install the clock assembly.


b.

Install the screw.


Hide 55670A 2.INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55844 3.INSTALL NO. 2 HEATER TO REGISTER DUCT

Hide 55085 4.INSTALL NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY

Hide 55084E 5.INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

Hide 55950G 6.INSTALL DEFROSTER NOZZLE ASSEMBLY

Hide 55302A 7.INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION