Home › Vehicle Interior › INTERIOR PANELS / TRIM › LOWER INSTRUMENT PANEL › 2015.08–2016.01
RM3270E _58 Vehicle Interior _041715 INTERIOR PANELS / TRIM _0213629 LOWER INSTRUMENT PANEL A

INTERIOR PANELS / TRIM  LOWER INSTRUMENT PANEL  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the lower instrument panel removal/installation are shown below.

Necessary Procedures after parts removed / installed / replaced
Replacement Part or Procedure Necessary Procedures Effects / Inoperative when not Performed Link
Disconnect cable from negative battery terminal w/ Power Back Door System:
Reset back door close position
Power door lock control system (Click here)

CAUTION:
B410192

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(for Type B)>PRECAUTION


PROCEDURE

Hide 1. TABLE OF BOLT, SCREW, NUT AND CLIP

HINT:

All bolts, screws and clips relevant to installing and removing the instrument panel are shown along with their alphabetic code in the table below.


B405228E01
5.49,2.177 7.094,2.417 1.604,0.24 10 false mm (in.) (L = Length) 1.135,0.135 1.906,0.333 0.771,0.198 10 false Shape 3.51,0.135 4.281,0.333 0.771,0.198 10 false Shape 5.823,0.125 6.594,0.323 0.771,0.198 10 false Shape 0.146,0.135 0.76,0.333 0.615,0.198 10 false Code 2.438,0.125 3.052,0.323 0.615,0.198 10 false Code 4.781,0.135 5.396,0.333 0.615,0.198 10 false Code 0.177,0.958 0.635,1.156 0.458,0.198 10 false <A> 2.49,0.969 2.948,1.167 0.458,0.198 10 false <B> 4.813,0.958 5.271,1.156 0.458,0.198 10 false <C> 0.188,1.896 0.646,2.094 0.458,0.198 10 false <D> 2.49,1.917 2.948,2.115 0.458,0.198 10 false <E> 1.781,0.656 2.24,0.854 0.458,0.198 10 false φ 5 1.74,0.844 2.479,1.042 0.74,0.198 10 false (0.197) 1.771,1.094 2.385,1.292 0.615,0.198 10 false L=14 1.74,1.271 2.813,1.469 1.073,0.198 10 false (0.551) 3.74,0.615 4.521,0.792 0.781,0.177 10 false φ 6 or φ 7 3.719,0.781 4.823,0.979 1.104,0.198 10 false (0.236 or 0.276) 4,1.052 4.615,1.25 0.615,0.198 10 false L=20 3.958,1.24 4.583,1.448 0.625,0.208 10 false (0.787) 6.448,0.656 6.906,0.854 0.458,0.198 10 false φ 6 6.417,0.844 6.99,1.052 0.573,0.208 10 false (0.236) 6.438,1.073 7.052,1.271 0.615,0.198 10 false L=20 6.406,1.24 7.031,1.448 0.625,0.208 10 false (0.787) 1.729,1.594 2.188,1.792 0.458,0.198 10 false φ 6 1.729,1.781 2.302,1.99 0.573,0.208 10 false (0.236) 1.74,2.031 2.354,2.229 0.615,0.198 10 false L=19 1.719,2.198 2.344,2.406 0.625,0.208 10 false (0.748)

Hide 2. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 55302A 4.REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 58810J 5.REMOVE CONSOLE BOX ASSEMBLY

Hide 84140 6.REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY

Hide 86140A 7.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (w/o Navigation System)

Hide 86120L 8.REMOVE NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System)

Hide 55905J 9.REMOVE CONTROL KNOB SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 84013A 10.REMOVE INTEGRATION PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)

Hide 55900 11.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

Hide 55407C 12.REMOVE LOWER INSTRUMENT COVER SUB-ASSEMBLY

a.
B409787C01
0,0 0,0 false
V113146

Place Hands Here
V113147

Remove in this Direction


Place your hands at the position shown in the illustration and pull as shown to detach the clip.


b.

Disconnect the connector and remove the lower instrument cover sub-assembly.


Hide 55447C 13.REMOVE NO. 2 SWITCH HOLE BASE

a.
B409791C01
1.063,1.823 1.479,1.573 true 0.844,1.76 1.073,1.917 0.229,0.156 10 true *a
*a Protective Tape


Put protective tape around the No. 2 switch hole base.


b.
B409793C01
0,0 0,0 false
V113146

Place Hands Here
V113147

Remove in this Direction


Place your hands at the position shown in the illustration and pull as shown to detach the clip and remove the No. 2 switch hole base.


c.

for Automatic Air Conditioning System:

Disconnect the cooler thermistor connector and hose and remove the No. 2 switch hole base.


Hide 55606 14.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.
B403955C01
1.177,1.594 1.396,1.75 0.219,0.156 10 true *a 2.906,1.167 3.125,1.323 0.219,0.156 10 true *a
*a Screw <A>


Remove the 2 screws <A>.


b.
B403956C01
0,0 0,0 false
V113146

Place Hands Here
V113147

Remove in this Direction


Place your hands at the position shown in the illustration and pull as shown to detach the clip and guide.


c.

Detach the claw and disconnect the DLC3 and remove the No. 1 instrument panel under cover sub-assembly.


Hide 73900 15.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 55607 16.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.
B403958C01
0,0 0,0 false
V113147

Remove in this Direction


Detach the claw and pull as shown in the illustration.


b.
B403959C01
0,0 0,0 false
V113147

Remove in this Direction


Pull as shown in the illustration, detach the guide and remove the No. 2 instrument panel under cover sub-assembly.


Hide 55550 17.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

a.
B406000C01
0,0 0,0 false
V113147

Remove in this Direction


Twist the glove door stopper pin as shown in the illustration and remove it.

HINT:

Use the same procedure for both glove door stopper pins.



b.
B409794

Open the glove compartment door assembly, detach the claw and disconnect the glove compartment door stopper sub-assembly.

HINT:

Pull diagonally to remove the glove compartment door stopper sub-assembly.



c.
B409795C01
0,0 0,0 false
V113147

Remove in this Direction


Pull as shown in the illustration to detach the hinge and remove the glove compartment door assembly.


Hide 55054 18.REMOVE GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

a.
B403980

Detach the claw and remove the glove compartment door stopper sub-assembly.


Hide 55303B 19.REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

a.

Detach the clamp and disconnect the illumination light.


b.

Remove the 7 screws <B>, 2 bolts <C> and screw <D>.


c.

Detach the guide and disconnect the connector.

B409796C01
2.948,1.292 3.167,1.448 0.219,0.156 10 true *a 1.688,1.25 1.896,1.406 0.208,0.156 10 true *c 0.635,3.469 0.833,3.625 0.198,0.156 10 true *d 2.729,2.344 2.927,2.5 0.198,0.156 10 true *e 6.427,0.667 6.625,0.823 0.198,0.156 10 true *f 1.938,1.708 2.156,1.865 0.219,0.156 10 true *a 2.625,1.125 2.833,1.281 0.208,0.156 10 true *c 0.073,1.865 0.281,2.021 0.208,0.156 10 true *c 5.51,1.448 5.719,1.604 0.208,0.156 10 true *c 6.823,1 7.031,1.156 0.208,0.156 10 true *c 4.917,2.708 5.125,2.865 0.208,0.156 10 true *c 3.115,3.094 3.323,3.25 0.208,0.156 10 true *c 6.5,2.229 6.698,2.385 0.198,0.156 10 true *d 0.427,1.458 0.625,1.615 0.198,0.156 10 true *f 2.427,1.75 2.646,1.906 0.219,0.156 10 true *b
*a Clamp *b Illumination Light
*c Screw <B> *d Bolt <C>
*e Screw <D> *f Guide



d.
B403968

Detach the claw and guide to disconnect the hood lock control lever sub-assembly and fuel lid lock open lever.


e.
B403969

Disconnect the hood lock control cable and fuel lid lock open cable and remove the lower instrument panel sub-assembly.