17111
1.INSTALL INTAKE MANIFOLD
| *a | Protrusion |
|
Upward |
Install a new gasket to the cylinder head sub-assembly with the protrusion facing upward.
|
Bolt |
|
Nut |
Install the intake manifold with the 6 bolts and 2 nuts. Uniformly tighten the bolts and nuts in several steps.
23701
2.INSTALL INJECTION PIPE SUB-ASSEMBLY
19871
3.INSTALL NO. 1 GLOW PLUG CONNECTOR
4.INSTALL WIRE HARNESS CLAMP BRACKET
Install the wire harness clamp bracket with the bolt.
Attach the wire harness clamp.
Install the wire harness clamp bracket with the 2 bolts.
Attach the 2 wire harness clamps to the wire harness clamp bracket.
11452
5.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE
Apply a light coat of engine oil to a new O-ring.
Install the O-ring to the engine oil level dipstick guide.
Install the engine oil level dipstick guide with the 2 bolts.
Install the engine oil level dipstick.
26100
6.INSTALL VENTURI ASSEMBLY
7.INSPECT FOR FUEL LEAK