27020
1.INSTALL GENERATOR ASSEMBLY
Install the generator assembly with the 2 bolts.
Connect the generator connector.
Install the generator wire with the nut to terminal B.
2.INSTALL NO. 2 IDLER PULLEY ASSEMBLY
Install the spacer, No. 2 idle pulley assembly and 2 pulley plates with the bolt.
16361A
3.INSTALL FAN AND GENERATOR V BELT
17701
4.INSTALL AIR CLEANER CASE SUB-ASSEMBLY
17801
5.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
17705
6.INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE
7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION