Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › SFI SYSTEM › from 2016.01
RM3270E _51 Engine / Hybrid System _048938 2TR-FE ENGINE CONTROL _0241353 SFI SYSTEM J

2TR-FE ENGINE CONTROL  SFI SYSTEM  VC Output Circuit  


DESCRIPTION

The ECM constantly generates a 5 V power source voltage from the battery voltage supplied to the +B (BATT) terminal to operate the microprocessor. The ECM also provides this power source voltage to the sensors through the VC output circuit.

A240424E35
4.375,1.073 6.198,1.25 1.823,0.177 10 false 5 V Constant Voltage Circuit 5.354,1.927 6.365,2.344 1.01,0.417 10 false Microprocessor 0.917,1.49 2.667,1.719 1.75,0.229 10 false from EFI-MAIN NO. 1 Relay 1.51,1.135 3.188,1.302 1.677,0.167 10 false from EFI-B Fuse 3.75,1 4.24,1.219 0.49,0.219 10 false BATT 0.313,1.948 2.635,2.458 2.323,0.51 10 false Throttle Position Sensor, Accelerator Pedal Position Sensor, etc. (Sensors which have ICs) 0.302,2.969 2.552,3.396 2.25,0.427 10 false Engine Coolant Temperature Sensor, Intake Air Temperature, etc. 4.073,2.823 4.333,3.031 0.26,0.208 10 false R 3.698,1.354 4.625,1.552 0.927,0.198 10 false +B, +B2 3.708,2.271 4,2.5 0.292,0.229 10 false VC 4.885,0.354 5.333,0.583 0.448,0.229 10 false ECM

When the VC circuit has a short circuit, the microprocessor in the ECM and sensors that are supplied power through the VC circuit are deactivated because power is not supplied from the VC circuit. When the system is in this condition, it will not start.

WIRING DIAGRAM

·

For the circuit diagram of the ECM power source refer to the ECM power source circuit.

Click hereEngine / Hybrid System>2TR-FE ENGINE CONTROL>SFI SYSTEM>ECM Power Source Circuit


·

VC Power Source Circuit

A380032E01
5.615,0.656 6.229,0.854 0.615,0.198 10 false VCV1 5.625,1.146 6.24,1.344 0.615,0.198 10 false VV1+ 2.479,1.552 3.094,1.75 0.615,0.198 10 false VVI- 0.188,0.75 0.865,0.979 0.677,0.229 10 false C164 0.188,0.927 1.802,1.323 1.615,0.396 10 false Camshaft Position Sensor (for Intake Side) 2.573,0.729 2.885,0.927 0.313,0.198 10 false VC 2.438,1.135 3.052,1.333 0.615,0.198 10 false VVI+ 5.635,1.479 6.25,1.677 0.615,0.198 10 false VV1- 5.354,0.573 5.667,0.771 0.313,0.198 10 false 21 5.354,0.979 5.667,1.177 0.313,0.198 10 false 23 5.354,1.406 5.667,1.604 0.313,0.198 10 false 22 2.854,0.646 3.01,0.844 0.156,0.198 10 false 3 2.854,1.052 3.01,1.25 0.156,0.198 10 false 1 2.865,1.49 3.021,1.688 0.156,0.198 10 false 2 5.198,0.74 5.813,0.938 0.615,0.198 10 false C146 5.208,1.156 5.823,1.354 0.615,0.198 10 false C146 5.208,1.573 5.823,1.771 0.615,0.198 10 false C146 5.208,2.365 5.823,2.563 0.615,0.198 10 false C146 5.208,2.771 5.823,2.969 0.615,0.198 10 false C146 5.198,3.198 5.813,3.396 0.615,0.198 10 false C146 5.198,3.99 5.813,4.188 0.615,0.198 10 false C146 5.208,4.396 5.823,4.594 0.615,0.198 10 false C146 5.208,4.813 5.823,5.01 0.615,0.198 10 false C146 0.156,2.365 0.771,2.563 0.615,0.198 10 false C163 0.156,2.573 1.781,2.906 1.625,0.333 10 false Camshaft Position Sensor (for Exhaust Side) 2.49,2.365 2.948,2.563 0.458,0.198 10 false VC2 2.406,2.771 3.021,2.969 0.615,0.198 10 false VVE+ 2.427,3.167 2.885,3.365 0.458,0.198 10 false VVE- 2.875,2.26 3.031,2.458 0.156,0.198 10 false 3 2.875,2.667 3.031,2.865 0.156,0.198 10 false 1 2.875,3.083 3.031,3.281 0.156,0.198 10 false 2 5.354,2.177 5.667,2.375 0.313,0.198 10 false 31 5.354,2.604 5.667,2.802 0.313,0.198 10 false 24 5.344,3.021 5.656,3.219 0.313,0.198 10 false 32 5.615,2.281 6.229,2.479 0.615,0.198 10 false VCE1 5.615,2.76 6.229,2.958 0.615,0.198 10 false EV1+ 5.625,3.104 6.24,3.302 0.615,0.198 10 false EV1- 0.208,4 0.823,4.198 0.615,0.198 10 false C143 0.219,4.208 3.125,4.406 2.906,0.198 10 false Air Pressure Sensor 2.552,3.99 2.865,4.188 0.313,0.198 10 false VC 2.542,4.385 3,4.583 0.458,0.198 10 false AIP 2.573,4.813 2.885,5.01 0.313,0.198 10 false E2 2.875,3.865 3.031,4.063 0.156,0.198 10 false 3 2.885,6.01 3.042,6.208 0.156,0.198 10 false 2 2.885,4.719 3.042,4.917 0.156,0.198 10 false 1 3.719,3.865 4.031,4.063 0.313,0.198 10 false * 3.729,4.292 4.042,4.49 0.313,0.198 10 false * 3.729,4.719 4.042,4.917 0.313,0.198 10 false * 5.354,3.802 5.667,4 0.313,0.198 10 false 20 5.344,4.229 5.656,4.427 0.313,0.198 10 false 26 5.333,4.635 5.646,4.833 0.313,0.198 10 false 25 5.635,3.896 6.25,4.094 0.615,0.198 10 false VCAI 5.635,4.396 6.094,4.594 0.458,0.198 10 false AIP 5.625,4.729 6.24,4.927 0.615,0.198 10 false EAIP 0.302,5.74 0.76,5.938 0.458,0.198 10 false A29 0.281,5.958 1.542,6.323 1.26,0.365 10 false Mass Air Flow Meter Sub-assembly 5.208,5.708 5.823,5.906 0.615,0.198 10 false C147 5.198,6.125 5.813,6.323 0.615,0.198 10 false C147 5.198,6.542 5.813,6.74 0.615,0.198 10 false C147 5.188,7 5.802,7.198 0.615,0.198 10 false C147 5.635,5.615 6.25,5.813 0.615,0.198 10 false VCVG 5.646,6.031 6.104,6.229 0.458,0.198 10 false E2G 5.635,6.542 5.948,6.74 0.313,0.198 10 false VG 5.635,7 6.094,7.198 0.458,0.198 10 false THA 5.344,5.51 5.656,5.708 0.313,0.198 10 false 33 5.354,5.948 5.667,6.146 0.313,0.198 10 false 32 5.344,6.354 5.656,6.552 0.313,0.198 10 false 24 5.344,6.823 5.656,7.021 0.313,0.198 10 false 23 2.594,5.729 2.906,5.927 0.313,0.198 10 false 5V 2.49,6.125 2.948,6.323 0.458,0.198 10 false E2G 2.594,6.531 2.906,6.729 0.313,0.198 10 false FG 2.5,7.01 2.958,7.208 0.458,0.198 10 false THA 2.875,6.427 3.031,6.625 0.156,0.198 10 false 1 2.885,5.563 3.042,5.76 0.156,0.198 10 false 3 2.885,4.313 3.042,4.51 0.156,0.198 10 false 2 2.875,6.896 3.031,7.094 0.156,0.198 10 false 4 0.563,7.396 5.917,7.594 5.354,0.198 10 false *: w/ Air Injection Control Driver 5.74,7.531 6.198,7.729 0.458,0.198 10 false ECM

A380033E01
5.656,0.938 6.271,1.135 0.615,0.198 10 false VCTA 5.667,1.385 6.281,1.583 0.615,0.198 10 false VTA1 5.667,1.74 6.281,1.938 0.615,0.198 10 false VTA2 5.656,2.042 6.115,2.24 0.458,0.198 10 false ETA 5.396,0.844 5.708,1.042 0.313,0.198 10 false 29 5.375,1.208 5.688,1.406 0.313,0.198 10 false 30 5.375,1.583 5.688,1.781 0.313,0.198 10 false 18 5.375,1.948 5.688,2.146 0.313,0.198 10 false 28 5.229,1.021 5.844,1.219 0.615,0.198 10 false C146 5.229,1.396 5.844,1.594 0.615,0.198 10 false C146 5.229,1.76 5.844,1.958 0.615,0.198 10 false C146 5.24,2.125 5.854,2.323 0.615,0.198 10 false C146 2.896,0.906 3.052,1.104 0.156,0.198 10 false 5 2.896,1.292 3.052,1.49 0.156,0.198 10 false 6 2.896,1.667 3.052,1.865 0.156,0.198 10 false 4 2.906,2.021 3.052,2.219 0.146,0.198 10 false 3 0.281,1.031 0.74,1.229 0.458,0.198 10 false C81 0.281,1.219 1.792,1.594 1.51,0.375 10 false Throttle Body with Motor Assembly 2.615,1.031 2.927,1.229 0.313,0.198 10 false VC 2.542,1.385 3,1.583 0.458,0.198 10 false VTA 2.469,1.74 3.083,1.938 0.615,0.198 10 false VTA2 2.635,2.094 2.948,2.292 0.313,0.198 10 false E2 0.271,2.573 0.729,2.771 0.458,0.198 10 false A30 0.281,2.781 1.438,3.177 1.156,0.396 10 false Accelerator Pedal Sensor Assembly 5.646,2.469 6.26,2.667 0.615,0.198 10 false VCPA 5.646,2.823 6.26,3.021 0.615,0.198 10 false VCP2 5.656,3.271 6.115,3.469 0.458,0.198 10 false VPA 5.656,3.667 6.271,3.865 0.615,0.198 10 false VPA2 5.667,3.958 6.125,4.156 0.458,0.198 10 false EPA 5.375,2.375 5.688,2.573 0.313,0.198 10 false 20 5.385,2.74 5.698,2.938 0.313,0.198 10 false 22 5.385,3.104 5.698,3.302 0.313,0.198 10 false 26 5.385,3.5 5.698,3.698 0.313,0.198 10 false 28 5.385,3.865 5.698,4.063 0.313,0.198 10 false 27 5.375,4.229 5.688,4.427 0.313,0.198 10 false 29 5.656,4.313 6.271,4.51 0.615,0.198 10 false EPA2 2.917,2.792 3.156,2.979 0.24,0.188 10 false 1 2.927,2.427 3.083,2.625 0.156,0.198 10 false 4 2.917,3.188 3.073,3.385 0.156,0.198 10 false 6 2.927,3.563 3.073,3.76 0.146,0.198 10 false 3 2.927,3.917 3.083,4.115 0.156,0.198 10 false 5 2.927,4.302 3.083,4.5 0.156,0.198 10 false 2 2.438,2.552 3.052,2.75 0.615,0.198 10 false VCPA 2.438,2.906 3.052,3.104 0.615,0.198 10 false VCP2 2.521,3.281 2.979,3.479 0.458,0.198 10 false VPA 2.448,3.677 3.063,3.875 0.615,0.198 10 false VPA2 2.5,4.021 2.958,4.219 0.458,0.198 10 false EPA 2.438,4.385 3.052,4.583 0.615,0.198 10 false EPA2 5.229,2.552 5.844,2.75 0.615,0.198 10 false G143 5.24,2.927 5.854,3.125 0.615,0.198 10 false G143 5.229,3.677 5.844,3.875 0.615,0.198 10 false G143 5.229,4.052 5.844,4.25 0.615,0.198 10 false G143 5.229,4.396 5.844,4.594 0.615,0.198 10 false G143 5.24,3.271 5.854,3.469 0.615,0.198 10 false G143 6.052,5.146 6.51,5.344 0.458,0.198 10 false ECM


CAUTION / NOTICE / HINT

NOTICE:

Check the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.READ VALUE USING GTS
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

2.CHECK TERMINAL VOLTAGE (POWER SOURCE OF ECM)

B

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

2.CHECK TERMINAL VOLTAGE (POWER SOURCE OF ECM)
A352218C10
1.896,0.094 2.385,0.344 0.49,0.25 2.354,0.688 1.677,1.76 true 2.479,0.677 2.667,1.74 true 1.969,0.135 2.427,0.333 0.458,0.198 10 false G143 2.542,1.802 3.313,2 0.771,0.198 10 false 1(+B) 1.469,1.813 1.948,2.042 0.479,0.229 10 false 2(+B2) 0.219,0.531 0.531,0.729 0.313,0.198 10 false *a
*a Component with harness connected
(ECM)


a.

Turn the ignition switch to ON.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
G143-1(+B) - Body ground Ignition switch ON 11 to 14 V
G143-2(+B2) - Body ground Ignition switch ON 11 to 14 V


HINT:

If the result is not as specified, since current is not flowing to the +B and +B2 terminals of the ECM, the system may not be started.



Result:
Proceed to
OK
NG



OK

3.CHECK CONNECTION BETWEEN GTS AND ECM (THROTTLE POSITION SENSOR)

NG

3.CHECK CONNECTION BETWEEN GTS AND ECM (THROTTLE POSITION SENSOR)
a.

Disconnect the throttle body with motor assembly connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine and ECT" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B


HINT:

Perform "Inspection After Repair" after replacing the throttle body with motor assembly.

Click hereEngine / Hybrid System>2TR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION



A

4.CHECK CONNECTION BETWEEN GTS AND ECM (ACCELERATOR PEDAL POSITION SENSOR)

B

REPLACE THROTTLE BODY WITH MOTOR ASSEMBLY

4.CHECK CONNECTION BETWEEN GTS AND ECM (ACCELERATOR PEDAL POSITION SENSOR)
a.

Disconnect the accelerator pedal sensor assembly connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine and ECT" item of the Data List.



Result:
Result Proceed to
Communication is not possible
(w/ Air Injection Control Driver)
A
Communication is not possible
(w/o Air Injection Control Driver)
B
Communication is possible C



A

5.CHECK CONNECTION BETWEEN GTS AND ECM (AIR PRESSURE SENSOR)

B

6.CHECK CONNECTION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY)

C

REPLACE ACCELERATOR PEDAL SENSOR ASSEMBLY

5.CHECK CONNECTION BETWEEN GTS AND ECM (AIR PRESSURE SENSOR)
a.

Disconnect the air pressure sensor connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine and ECT" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

6.CHECK CONNECTION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY)

B

6.CHECK CONNECTION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY)
a.

Disconnect the mass air flow meter sub-assembly connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine and ECT" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B


HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>2TR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION



A

7.CHECK CONNECTION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR FOR INTAKE SIDE)

B

REPLACE MASS AIR FLOW METER SUB-ASSEMBLY

7.CHECK CONNECTION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR FOR INTAKE SIDE)
a.

Disconnect the camshaft position sensor (for intake side) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine and ECT" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

8.CHECK CONNECTION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR FOR EXHAUST SIDE)

B

REPLACE CAMSHAFT POSITION SENSOR (FOR INTAKE SIDE)

8.CHECK CONNECTION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR FOR EXHAUST SIDE)
a.

Disconnect the camshaft position sensor (for exhaust side) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine and ECT" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

9.CHECK HARNESS AND CONNECTOR

B

REPLACE CAMSHAFT POSITION SENSOR (FOR EXHAUST SIDE)

9.CHECK HARNESS AND CONNECTOR
a.

Disconnect the throttle body with motor assembly connector.


b.

Disconnect the accelerator pedal sensor assembly connector.


c.

Disconnect the air pressure sensor connector (with air pressure sensor).


d.

Disconnect the mass air flow meter sub-assembly connector.


e.

Disconnect the camshaft position sensor (for intake side) connector.


f.

Disconnect the camshaft position sensor (for exhaust side) connector.


g.

Disconnect the ECM connectors.


h.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
C146-29 (VCTA) - Body ground Always 10 kΩ or higher
G143-20 (VCPA) - Body ground Always 10 kΩ or higher
G143-22 (VCP2) - Body ground Always 10 kΩ or higher
C147-33 (VCVG) - Body ground Always 10 kΩ or higher
C146-20 (VCAI) - Body ground Always 10 kΩ or higher
C146-31 (VCE1) - Body ground Always 10 kΩ or higher
C146-21 (VCV1) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR