Home › Engine / Hybrid System › 1KD-FTV ENGINE MECHANICAL › ENGINE UNIT › from 2016.01
RM3270E _51 Engine / Hybrid System _048915 1KD-FTV ENGINE MECHANICAL _0242490 ENGINE UNIT A

1KD-FTV ENGINE MECHANICAL  ENGINE UNIT  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the parts in the following chart (A), replace the No. 1 injection pipe sub-assembly, No. 2 injection pipe sub-assembly, No. 3 injection pipe sub-assembly, No. 4 injection pipe sub-assembly and/or fuel inlet pipe sub-assembly with new ones.

Replaced Parts (A) Pipes Requiring New Replacement
·

Injector assembly (including shuffling the injector assemblies between the cylinders)

·

Common rail assembly

·

Cylinder head sub-assembly


·

No. 1 injection pipe sub-assembly

·

No. 2 injection pipe sub-assembly

·

No. 3 injection pipe sub-assembly

·

No. 4 injection pipe sub-assembly


·

Supply pump assembly

·

Common rail assembly

·

Cylinder block sub-assembly

·

Cylinder head sub-assembly

·

Cylinder head gasket

·

Timing Gear Case Assembly


Fuel inlet pipe sub-assembly

·

After removing the No. 1 injection pipe sub-assembly, No. 2 injection pipe sub-assembly, No. 3 injection pipe sub-assembly, No. 4 injection pipe sub-assembly and fuel inlet pipe sub-assembly, clean them with a brush and compressed air.



PROCEDURE

Hide 11322A 1.REMOVE NO. 1 TIMING BELT COVER

Hide 13505 3.REMOVE NO. 1 TIMING BELT IDLER SUB-ASSEMBLY

Hide 13408 4.REMOVE CRANKSHAFT PULLEY SUB-ASSEMBLY

Hide 17946 5.REMOVE NO. 2 INTERCOOLER SUPPORT BRACKET

a.

Remove the 2 bolts and No. 2 intercooler support bracket from the cylinder head sub-assembly.


Hide 17945 6.REMOVE INTERCOOLER SUPPORT BRACKET

a.

Remove the 2 bolts and intercooler support bracket from the cylinder head sub-assembly.


Hide 17167 9.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

Hide 15407 13.DISCONNECT TURBO OIL INLET PIPE SUB-ASSEMBLY

Hide 14.REMOVE EXHAUST MANIFOLD WITH TURBOCHARGER

a.
A352056

Remove the 8 nuts, 8 spacers, 8 collars and exhaust manifold with turbocharger shown in the illustration.


Hide 15.REMOVE NO. 2 IDLE PULLEY ASSEMBLY

Hide 27020 16.REMOVE GENERATOR ASSEMBLY

Hide 12511C 17.REMOVE GENERATOR BRACKET

a.

Remove the bolt and generator bracket.


Hide 16620 18.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

a.
A352057

Remove the 4 bolts and V-ribbed belt tensioner assembly from the cylinder block sub-assembly.


Hide 88431 19.REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET

a.

Remove the 4 bolts and No. 1 compressor mounting bracket from the cylinder block sub-assembly.


Hide 16321 20.REMOVE WATER INLET

Hide 16331A 21.REMOVE THERMOSTAT

Hide 16331 22.REMOVE WATER OUTLET

a.
A352058

Remove the 2 bolts, water outlet and gasket from the cylinder head sub-assembly.


Hide 25861C 24.REMOVE VACUUM SWITCHING VALVE BRACKET

Hide 26100G 25.REMOVE DIESEL THROTTLE BODY ASSEMBLY

Hide 17873A 26.REMOVE NO. 2 INTAKE AIR CONNECTOR BRACKET

Hide 17861 27.REMOVE INTAKE AIR CONNECTOR

Hide 15601 28.REMOVE OIL FILTER SUB-ASSEMBLY

Hide 23701 29.REMOVE NO. 1, NO. 2 AND NO. 3 INJECTION PIPE SUB-ASSEMBLY

Hide 23704 30.REMOVE NO. 4 INJECTION PIPE SUB-ASSEMBLY

Hide 23770 31.REMOVE NO. 2 NOZZLE LEAKAGE PIPE ASSEMBLY

Hide 15301 32.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

Hide 23804C 33.REMOVE FUEL INLET PIPE SUB-ASSEMBLY

Hide 23810A 34.REMOVE COMMON RAIL ASSEMBLY

Hide 22100 35.REMOVE FUEL SUPPLY PUMP ASSEMBLY

Hide 25617A 37.REMOVE NO. 2 EGR HOLE COVER PLATE

a.

Remove the 2 nuts and No. 2 EGR hole cover plate.


b.

Remove the gasket.


Hide 19850 38.REMOVE GLOW PLUG ASSEMBLY

Hide 15701C 39.REMOVE OIL COOLER COVER SUB-ASSEMBLY

Hide 29300 40.REMOVE VACUUM PUMP ASSEMBLY

a.
A352059

Remove the 2 nuts, vacuum pump assembly and 2 O-rings from the timing gear cover.


Hide 44320 41.REMOVE VANE PUMP ASSEMBLY

a.
A352060

Remove the 2 nuts, vane pump assembly and O-ring from the timing gear case assembly.


Hide 12311 45.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH

a.
A352061C01
0.083,0.083 0.302,0.25 0.219,0.167 10 true *a 1.833,0.083 2.052,0.25 0.219,0.167 10 true *b
*a LH Side
*b RH Side


Remove the 4 bolts and front No. 1 engine mounting bracket RH from the cylinder block sub-assembly.


Hide 12315 46.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH

a.

Remove the 4 bolts and front No. 1 engine mounting bracket LH from th cylinder block sub-assembly.