Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR DIFFERENTIAL CARRIER ASSEMBLY(w/ Differential Lock) › from 2016.01
RM3270E _52 Drivetrain _041686 AXLE AND DIFFERENTIAL _0243211 REAR DIFFERENTIAL CARRIER ASSEMBLY(w/ Differential Lock) A

AXLE AND DIFFERENTIAL  REAR DIFFERENTIAL CARRIER ASSEMBLY(w/ Differential Lock)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·
C313282C03
2.573,0.583 2.906,0.583 false 2.948,0.479 3.26,0.677 0.313,0.198 10 false *a
*a Object Exceeding Weight Limit of Transmission Jack


Be sure to perform this procedure with several people as the rear differential carrier assembly is very heavy.

·

Be sure to follow the procedure described in the repair manual, or the transmission jack may suddenly drop or a part may fall.



HINT:

The following procedures are for BD22 (w/ Differential Lock).


PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 4.REMOVE REAR AXLE SHAFT WITH BACKING PLATE LH

Hide 5.REMOVE REAR AXLE SHAFT WITH BACKING PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 41171 6.REMOVE REAR DIFFERENTIAL PROTECTOR

Hide 41110 7.REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

a.
C326396

Disconnect the 2 connectors.


b.
C325514

Remove the 10 nuts, 10 washers and rear differential carrier assembly.

NOTICE:

Be careful not to damage the contact surface.


CAUTION:

The rear differential carrier assembly is a heavy component. Make sure that it is supported securely.


NOTICE:
·

Securely support the rear differential carrier assembly while performing this step to avoid excessively tilting or dropping the rear differential carrier assembly.

·

The remaining oil may leak out when removing the rear differential carrier assembly.

·

Do not damage the installation surface when removing the rear differential carrier assembly.

·

Remove the bolts with the rear differential carrier assembly secured.




Hide 42181 8.REMOVE REAR DIFFERENTIAL CARRIER GASKET