1. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
58810J
3.REMOVE CONSOLE BOX ASSEMBLY
46334
4.REMOVE INTERMEDIATE LEVER PROTECTOR
89441A
5.REMOVE DECELERATION SENSOR
| *1 | Fuel Lid Control Cable Clamp |
Detach the fuel lid control cable clamp from the deceleration sensor.
Disconnect the deceleration sensor connector.
Remove the 2 bolts and deceleration sensor.