Home › Engine / Hybrid System › 2GD-FTV STARTING › ENGINE SWITCH › from 2016.01
RM3270E _51 Engine / Hybrid System _048929 2GD-FTV STARTING _0243445 ENGINE SWITCH A

2GD-FTV STARTING  ENGINE SWITCH  REMOVAL  


PROCEDURE

Hide 45100 1.REMOVE STEERING WHEEL ASSEMBLY (for LHD)

Hide 55410C 2.REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for LHD)

Hide 89611 3.REMOVE ENGINE SWITCH (for LHD)

a.
A351905

Detach the claw on the top side of the engine switch, and then tilt the engine switch and detach the claw on the bottom side as shown in the illustration.


b.

Disconnect the engine switch connector and remove the engine switch.


Hide 55446A 4.REMOVE NO. 1 SWITCH HOLE BASE (for RHD)

Hide 89611 5.REMOVE ENGINE SWITCH (for RHD)

a.
C322604

Detach the 2 claws and remove the engine switch.