Home › Engine / Hybrid System › 2TR-FE ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL
RM1880E _51 Engine / Hybrid System _013210 2TR-FE ENGINE MECHANICAL _0068468 FRONT CRANKSHAFT OIL SEAL A

2TR-FE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 5.REMOVE FRONT CRANKSHAFT OIL SEAL

a.
A252560C07
1.49,1.365 0.615,1.365 true 0.417,1.292 0.708,1.542 0.292,0.25 10 false *1
*1 Protective Tape


Using a screwdriver, pry out the oil seal.

NOTICE:
·

Do not damage the surface of the oil seal press fit hole or the crankshaft.

·

Check the crankshaft for damage after removing the oil seal. If the crankshaft is damaged, smooth the surface with 400-grit sandpaper.



HINT:

Tape the screwdriver tip before use.