Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.TEMPORARILY INSTALL LOWER CONTROL ARM ASSEMBLY LH
Temporarily install the lower arm with the 2 bolts and 2 nut.
While fixing the nuts in place, tighten the bolts.
2.CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
3.INSTALL REAR WHEEL
4.STABILIZE SUSPENSION
5.TIGHTEN LOWER CONTROL ARM ASSEMBLY LH
Tighten the 2 bolts.
While fixing the nuts in place, tighten the bolts.