Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type)
RM1880E _56 Audio / Visual / Telematics _013234 AUDIO / VIDEO _0068594 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  CD Sound Skips  


PROCEDURE

1.CHECK DISC
a.
I100152

Check that the disc is not deformed or cracked.

OK:

No deformation or cracks on the disc



Result:
Proceed to
OK
NG



OK

2.CHECK DISC

NG

CHANGE DISC

2.CHECK DISC
a.
I100151

Check the disc.

OK:

The disc is clean.


HINT:

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.



Result:
Proceed to
OK
NG



OK

3.CHECK OPERATION

NG

CLEAN DISC

3.CHECK OPERATION
a.

Check if the problem recurs using another disc.

OK:

The problem does not occur.



Result:
Proceed to
OK
NG



OK

END

NG

4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Check that the radio and display receiver assembly is properly installed.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER>INSTALLATION

OK:

Radio and display receiver assembly is properly installed.



Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY