Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type)
RM1880E _56 Audio / Visual / Telematics _013234 AUDIO / VIDEO _0068594 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Speaker Circuit  


DESCRIPTION

The radio and display receiver assembly sends sound signals to the speakers.

WIRING DIAGRAM

C240170
5.802,6.646 6.833,7.125 1.031,0.479 10 false Radio Receiver Assembly 5.875,3.063 6.156,3.229 0.281,0.167 10 false FL- 5.875,2.563 6.156,2.729 0.281,0.167 10 false FL+ 5.875,1.677 6.25,1.906 0.375,0.229 10 false FR- 5.875,1.167 6.177,1.333 0.302,0.167 10 false FR+ 5.427,3.083 5.802,3.25 0.375,0.167 10 false G129 5.438,2.563 5.813,2.729 0.375,0.167 10 false G129 5.448,1.688 5.917,1.906 0.469,0.219 10 false G129 5.427,1.167 5.865,1.354 0.438,0.188 10 false G129 2.948,2.01 5.198,2.208 2.25,0.198 10 false Front No. 2 Speaker Assembly RH 2.938,3.438 5.188,3.635 2.25,0.198 10 false Front No. 2 Speaker Assembly LH 0.729,1.333 2.063,1.844 1.333,0.51 10 false Front No. 1 Speaker Assembly RH 0.729,2.708 2.01,3.094 1.281,0.385 10 false Front No. 1 Speaker Assembly LH 5.542,0.948 5.667,1.115 0.125,0.167 10 false 1 5.563,1.479 5.688,1.646 0.125,0.167 10 false 5 5.552,2.344 5.677,2.51 0.125,0.167 10 false 2 5.552,2.875 5.677,3.042 0.125,0.167 10 false 6 4.344,1.083 4.469,1.25 0.125,0.167 10 false 4 4.344,1.594 4.542,1.781 0.198,0.188 10 false 2 3.885,1.083 4.354,1.25 0.469,0.167 10 false TWR+ 3.917,1.792 4.417,2.042 0.5,0.25 10 false TWR- 3.51,1.083 3.635,1.25 0.125,0.167 10 false 3 3.51,1.604 3.635,1.771 0.125,0.167 10 false 1 3.698,2.479 3.823,2.646 0.125,0.167 10 false + 3.698,2.99 3.823,3.156 0.125,0.167 10 false - 3.698,1.083 3.823,1.25 0.125,0.167 10 false + 3.698,1.583 3.823,1.75 0.125,0.167 10 false - 3.896,2.479 4.365,2.646 0.469,0.167 10 false TWL+ 3.927,3.188 4.333,3.354 0.406,0.167 10 false TWL- 4.344,2.479 4.51,2.667 0.167,0.188 10 false 4 4.344,2.99 4.531,3.156 0.188,0.167 10 false 2 3.51,2.479 3.635,2.646 0.125,0.167 10 false 3 3.51,3 3.635,3.167 0.125,0.167 10 false 1 2.313,1.573 2.438,1.74 0.125,0.167 10 false 2 2.302,1.292 2.427,1.458 0.125,0.167 10 false 1 2.313,2.969 2.438,3.135 0.125,0.167 10 false 2 2.302,2.698 2.427,2.865 0.125,0.167 10 false 1 5.875,5.865 6.302,6.094 0.427,0.229 10 false RL- 5.875,5.344 6.25,5.583 0.375,0.24 10 false RL+ 5.875,4.469 6.323,4.729 0.448,0.26 10 false RR- 5.875,3.958 6.313,4.208 0.438,0.25 10 false RR+ 5.438,5.865 5.813,6.031 0.375,0.167 10 false G128 5.438,5.354 5.813,5.521 0.375,0.167 10 false G128 5.438,4.479 5.896,4.688 0.458,0.208 10 false G128 5.438,3.958 5.906,4.177 0.469,0.219 10 false G128 5.552,3.75 5.677,3.917 0.125,0.167 10 false 1 5.552,4.26 5.677,4.427 0.125,0.167 10 false 3 5.573,5.115 5.698,5.281 0.125,0.167 10 false 2 5.563,5.646 5.75,5.813 0.188,0.167 10 false 6 0.729,4.135 1.635,4.531 0.906,0.396 10 false Rear Speaker Assembly RH 0.729,5.521 1.625,5.938 0.896,0.417 10 false Rear Speaker Assembly LH 2.313,5.479 2.438,5.646 0.125,0.167 10 false 1 2.323,5.75 2.448,5.917 0.125,0.167 10 false 2 2.313,4.083 2.438,4.25 0.125,0.167 10 false 1 2.323,4.354 2.448,4.521 0.125,0.167 10 false 2 2.948,1.875 3.26,2.042 0.313,0.167 10 false H6 2.948,3.271 3.26,3.49 0.313,0.219 10 false I6 0.729,1.146 1.042,1.313 0.313,0.167 10 false H4 0.729,2.51 1.063,2.729 0.333,0.219 10 false I1 0.729,3.938 1.031,4.167 0.302,0.229 10 false J7 0.729,5.323 1.094,5.573 0.365,0.25 10 false J3

PROCEDURE

1.CHECK SPEAKER
a.

Check the malfunctioning speakers.

Result:
Result Proceed to
Malfunction in front speaker area A
Malfunction in rear speaker area B




A

2.CHECK FRONT SIDE SPEAKER

B

7.INSPECT REAR SPEAKER ASSEMBLY
2.CHECK FRONT SIDE SPEAKER
a.

Check the malfunctioning speakers.

Result:
Result Proceed to
Front No. 2 speaker assembly A
Front No. 1 speaker assembly B




A

3.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

B

5.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
3.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
a.

Temporarily replace the speaker with a new or normally functioning one.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL


b.

Check that the malfunction disappears.

HINT:
·

Connect all the speaker connectors to the speakers.

·

When there is a possibility that either the right or left speaker is defective, inspect by interchanging the right one with the left one.



Result:
Result Proceed to
Malfunction does not disappear A
Malfunction disappears B




A

4.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER - FRONT NO. 2 SPEAKER)

B

REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

4.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER - FRONT NO. 2 SPEAKER)
a.

Disconnect the G129 radio and display receiver assembly connector.


b.

Disconnect the H6*1 and/or I6*2 speaker connector.

*1: for RH

*2: for LH



c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for RH
Tester Connection Condition Specified Condition
G129-1 (FR+) - H6-4 Always Below 1 Ω
G129-5 (FR-) - H6-2
G129-1 (FR+) - Body ground Always 10 kΩ or higher
G129-5 (FR-) - Body ground

for LH
Tester Connection Condition Specified Condition
G129-2 (FL+) - I6-4 Always Below 1 Ω
G129-6 (FL-) - I6-2
G129-2 (FL+) - Body ground Always 10 kΩ or higher
G129-6 (FL-) - Body ground



Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.

Disconnect the H4*1 and/or I1*2 speaker connector.

*1: for RH

*2: for LH



b.
E178457

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 4 Ω



Result:
Proceed to
OK
NG



OK

6.CHECK HARNESS AND CONNECTOR (FRONT NO. 2 SPEAKER - FRONT NO. 1 SPEAKER)

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

6.CHECK HARNESS AND CONNECTOR (FRONT NO. 2 SPEAKER - FRONT NO. 1 SPEAKER)

*1: for RH

*2: for LH


a.

Disconnect the H6*1 and/or I6*2 speaker connector.


b.

Disconnect the H4*1 and/or I1*2 speaker connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for RH
Tester Connection Condition Specified Condition
H6-3 - H4-1 Always Below 1 Ω
H6-1 - H4-2
H6-3 - Body ground Always 10 kΩ or higher
H6-1 - Body ground

for LH
Tester Connection Condition Specified Condition
I6-3 - I1-1 Always Below 1 Ω
I6-1 - I1-2
I6-3 - Body ground Always 10 kΩ or higher
I6-1 - Body ground



Result:
Proceed to
OK
NG



OK

REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

7.INSPECT REAR SPEAKER ASSEMBLY
a.

Disconnect the J7*1 and/or J3*2 speaker connector.

*1: for RH

*2: for LH



b.
E178457

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 4 Ω



Result:
Proceed to
OK
NG



OK

8.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER - REAR SPEAKER)

NG

8.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER - REAR SPEAKER)
a.

Disconnect the G128 radio and display receiver assembly connector.


b.

Disconnect the J7*1 and/or J3*2 speaker connector.

*1: for RH

*2: for LH



c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for RH
Tester Connection Condition Specified Condition
G128-1 (RR+) - J7-1 Always Below 1 Ω
G128-3 (RR-) - J7-2
G128-1 (RR+) - Body ground Always 10 kΩ or higher
G128-3 (RR-) - Body ground

for LH
Tester Connection Condition Specified Condition
G128-2 (RL+) - J3-1 Always Below 1 Ω
G128-6 (RL-) - J3-2
G128-2 (RL+) - Body ground Always 10 kΩ or higher
G128-6 (RL-) - Body ground



Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR