For vehicles equipped with an Extension Module, refer to optional equipment's manuals.
Press the "SETUP" switch and select the "Display" button.
Select the "General" and enter the "Display (General)" screen.
| *a | Example | - | - |
Reset the display settings (contrast and brightness) and check that the screen appears normal.
The display returns to normal.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check that the cabin temperature is higher than -20°C (-4.0°F).
The cabin temperature is higher than -20°C (-4.0°F).
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Enter the "Color Bar Check Mode" screen.
Check that the color bars match the displayed names.
Color bars match the displayed names.
| Proceed to |
|---|
| OK |
| NG |
OK
NG