1.INSTALL COOLING (REAR) UNIT ASSEMBLY
Install the cooling (rear) unit assembly with the 3 bolts.
2.CONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
Connect the air conditioning tube and accessory assembly.
Install the 2 bolts.
3.CONNECT NO. 1 COOLER COVER
Connect the No. 1 cooler cover with the 2 bolts.
Install a new packing.
4.INSTALL QUARTER VENT DUCT ASSEMBLY RH
Attach the 5 claws to install the quarter vent duct assembly RH.
5.INSTALL REAR BUMPER COVER
6.INSTALL NO. 1 COOLER AIR DUCT
Attach the 3 claws to install the No. 1 cooler air duct.
Install the rear cooler relay with the screw.
Attach the 4 clamps and connect the connectors.
7.INSTALL NO. 2 COOLER AIR DUCT
Install the No. 2 cooler air duct with the 11 clips.
8.INSTALL NO. 3 COOLER AIR DUCT
Install the No. 3 cooler air duct with the 7 clips.
9.INSTALL ROOF HEADLINING ASSEMBLY
10.CHARGE REFRIGERANT
11. WARM UP ENGINE
12.CHECK FOR REFRIGERANT GAS LEAK