1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
2.REMOVE ROOF HEADLINING ASSEMBLY
3.REMOVE NO. 3 COOLER AIR DUCT
Remove the 7 clips and No. 3 cooler air duct.
4.REMOVE NO. 2 COOLER AIR DUCT
Remove the 11 clips and No. 2 cooler air duct.
5.REMOVE NO. 1 COOLER AIR DUCT
Disconnect the connectors and detach the 4 clamps.
Remove the screw and rear cooler relay.
Release the 3 claws fittings, and remove the clip and No. 1 cooler air duct.
6.REMOVE REAR BUMPER COVER
7.REMOVE QUARTER VENT DUCT ASSEMBLY RH
Detach the 5 claws and remove the quarter vent duct assembly RH.
8.DISCONNECT NO. 1 COOLER COVER
Remove the packing.
Remove the 2 bolts and disconnect the No. 1 cooler cover.
9.DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
Remove the 2 bolts.
Disconnect the air conditioning tube and accessory assembly.
Do not use a screwdriver or similar tool to disconnect the air conditioning tube and accessory assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
Remove the 2 O-rings from the air conditioning tube and accessory assembly.
10.REMOVE COOLING (REAR) UNIT ASSEMBLY
Remove the 3 bolts and cooling (rear) unit assembly.