Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER
RM1880E _58 Vehicle Interior _013245 HEATING / AIR CONDITIONING _0068672 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL COOLER CONDENSER ASSEMBLY

E227762

a.

Install the cooler condenser assembly.


Hide 2.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

E227760
2.542,0.604 2.875,0.875 0.333,0.271 10 false *1 0.573,0.042 0.823,0.281 0.25,0.24 10 true *1 0.51,0.323 0.74,0.531 0.229,0.208 10 true *1 1,0.635 1.26,0.875 0.26,0.24 10 true *2 1.792,1.083 2.063,1.333 0.271,0.25 10 false *2 2.125,1.229 2.396,1.5 0.271,0.271 10 true *2 1.458,0.896 1.698,1.146 0.24,0.25 10 true *3
*1 Bolt A
*2 Bolt B
*3 Bolt C


a.

Install the upper radiator support sub-assembly with the 7 bolts.

Torque:
for bolt A : 5.5 N*m (56 kgf*cm, 49 in.*lbf)
for bolt B : 5.4 N*m (55 kgf*cm, 48 in.*lbf)
for bolt C : 7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 4.INSTALL AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

a.

Remove the vinyl tape attached to the air conditioning tube and accessory assembly and the connecting part of the cooler condenser.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the air conditioning tube and accessory assembly joint.

Compressor oil:

ND-OIL 8 or equivalent



c.

Install the O-ring to the air conditioning tube and accessory assembly.


d.

Install the air conditioning tube and accessory assembly on the cooler condenser with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 5.INSTALL NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.

Remove the vinyl tape attached to the No. 1 cooler refrigerant discharge hose and the connecting part of the cooler condenser.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 1 cooler refrigerant discharge hose joint.

Compressor oil:

ND-OIL 8 or equivalent



c.

Install the O-ring to the No. 1 cooler refrigerant discharge hose.


d.

Install the No. 1 cooler refrigerant discharge hose to the cooler condenser with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)