1.REMOVE BACK DOOR TRIM BOARD ASSEMBLY
Detach the 16 clips and remove the back door trim board.
2.REMOVE BACK DOOR LOCK ASSEMBLY
3.REMOVE BACK DOOR OUTSIDE HANDLE
Remove the 2 nuts and back door outside handle.
4.REMOVE BACK DOOR OUTSIDE GARNISH
5.REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)
6.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
7.REMOVE REAR WIPER MOTOR ASSEMBLY
8.REMOVE REAR WIPER MOTOR GROMMET
9.REMOVE CENTER STOP LIGHT COVER
10.REMOVE CENTER STOP LIGHT ASSEMBLY
11.REMOVE REAR WASHER NOZZLE SUB-ASSEMBLY
12.REMOVE BACK DOOR GLASS CHANNEL LH
13.REMOVE BACK DOOR GLASS CHANNEL RH
Use the same procedure described for the LH side.
14.REMOVE BACK DOOR PANEL CUSHION
for Upper Side:
Use the same procedure for both back door panel cushions.
Remove the back door panel cushion.
for Lower Side:
Use the same procedure for both back door panel cushions.
Remove the back door panel cushion.
15.REMOVE BACK DOOR LOWER STOPPER
Use the same procedure for both back door lower stoppers.
Remove the bolt and back door lower stopper.
16.REMOVE BACK DOOR STAY ASSEMBLY LH
17.REMOVE BACK DOOR STAY ASSEMBLY RH
Use the same procedure described for the LH side.