2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

DIAGNOSIS SYSTEM

Troubleshooting · Vehicles built from Aug 2013


DESCRIPTION
  1. Entry and start system (for start function) data and the Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the function seems to be malfunctioning, use the intelligent tester to check for malfunctions and perform repairs.


CHECK DLC3
  1. Check the DLC3 (Click here).


INSPECT BATTERY VOLTAGE
If the voltage is below 11 V, recharge or replace the battery before proceeding.

Standard voltage:
11 to 14 V

← TERMINALS OF ECU (from Aug 2013)DTC CHECK / CLEAR (from Aug 2013) →