2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Aug 2013


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / DTC.

  5. Check for DTCs.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / DTC.

  5. Clear the DTCs by following the directions on the intelligent tester display.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

← DIAGNOSIS SYSTEM (from Aug 2013)DATA LIST / ACTIVE TEST (from Aug 2013) →