REMOVAL
Removal / installation · Vehicles built from Aug 2013
| 1. REMOVE REAR AXLE SHAFT LH |
Remove the rear axle shaft LH (Click here).
| 2. REMOVE REAR AXLE SHAFT RH |
- HINT:
- Use the same procedure described for the LH side.
| 3. REMOVE PROPELLER SHAFT ASSEMBLY |
Remove the propeller shaft assembly (Click here).
| 4. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY |
![]() ![]() |
Remove the 11 nuts, 11 washers and differential carrier.
- NOTICE:
- Be careful not to damage the contact surface.
Disconnect the rear differential lock actuator breather hose from the differential actuator assembly.
Disconnect the differential lock actuator connector.

| 5. REMOVE REAR DIFFERENTIAL CARRIER GASKET |

