Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014from Aug 2014
DESCRIPTION
This circuit is from the parking brake switch assembly to the radio and display receiver assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
HINT:
When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1. CHECK VEHICLE SIGNAL (OPERATION CHECK)
Display the "Vehicle Signal Check Mode" screen (Click here).
Check that the display changes between ON and OFF according to the parking brake operation.
OK:
Parking Brake Position
Display
Applied
ON
Released
OFF
HINT:
This display is updated once per second. As a result, it is normal for the display to lag behind the actual change in the switch.