Circuit diagnosis · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Aug 2013 – Jul 2014from Aug 2014
INSPECTION PROCEDURE
HINT:
If the operation of a cellular phone or the navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
When replacing the navigation receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1. CHECK USAGE CONDITION
Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
The cellular phone is "Bluetooth" compatible (Click here).
"Bluetooth" setting of the cellular phone is on.
Operating system and software of the cellular phone are the latest versions.
There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.
Register the cellular phone again and check if it is registered correctly.
HINT:
If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
END (TEMPORARY MALFUNCTION WITH "Bluetooth" OF CELLULAR PHONE)
3. CHECK BRING CELLULAR PHONE NEAR IN-VEHICLE DEVICE
Place the cellular phone close to the navigation receiver assembly.
Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Clear all "Bluetooth" devices registered to the cellular phone and navigation receiver assembly.
Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Check if the cellular phone can be registered normally to another "Bluetooth" audio compatible vehicle of the same model.
HINT:
Make sure to obtain the customer's permission to perform this procedure.
After the inspection, clear the registered information and usage history acquired during the inspection.
If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Using another "Bluetooth" compatible cellular phone, register the cellular phone and check that it is registered correctly.
HINT:
Make sure to obtain the customer's permission to perform this procedure.
After the inspection, clear the registered information and usage history acquired during the inspection.
If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.