2013-2015 Land Cruiser Prado · Service Manual Vehicle Interior

B2761 Intrusion Sensor Internal Circuit Malfunction

Diagnostic trouble codes · Vehicles built from Aug 2013

DESCRIPTION

  1. The theft warning radar sensor (intrusion sensor) conducts a self-diagnosis immediately after power is supplied to the sensor (when the theft deterrent system is set).
  2. If a malfunction is detected in the intrusion wave transmission or wave reception, or the theft warning radar sensor (intrusion sensor) wave transmission or wave reception circuit, the theft warning radar sensor (intrusion sensor) sends a signal to the main body ECU. The ECU then stores this DTC.
DTC Code
DTC Detection Condition
Trouble Area
B2761
The theft warning radar sensor (intrusion sensor) outputs a signal indicating a sensor malfunction.
Theft warning radar sensor (intrusion sensor)

INSPECTION PROCEDURE


1. REPLACE THEFT WARNING RADAR SENSOR (INTRUSION SENSOR)
  1. Replace the theft warning radar sensor (intrusion sensor) (Click here).


NEXT

END


← DIAGNOSTIC TROUBLE CODE CHART (from Aug 2014)B2762 Intrusion Sensor Signal Circuit Malfunction (+ B2764) (Aug 2013 – Jul 2014) →